Cup Holder / Center Console Removal
#1
#3
RE: Cup Holder / Center Console Removal
Full Floor Console
1. Before proceeding with the following repair procedure, review all warnings and cautions. 2. Using a trim stick C-4755 or equivalent, separate the seven front console bezel clips (2), lift up the back of the bezel (1) and remove.
3. Remove the bolts (1) and lift the rear of the base up to release the front guide pins (5). 4. Remove the front base (2).
Hope this helps...
1. Before proceeding with the following repair procedure, review all warnings and cautions. 2. Using a trim stick C-4755 or equivalent, separate the seven front console bezel clips (2), lift up the back of the bezel (1) and remove.
3. Remove the bolts (1) and lift the rear of the base up to release the front guide pins (5). 4. Remove the front base (2).
Hope this helps...
#4
RE: Cup Holder / Center Console Removal
Wow P/S you are the best!!! Thank you. I owe you lunch!
EDIT: The reason I need this removed is because im going to run some wires from the stock amp to my aftermarket amp. My aftermarket amp is going to be under the drivers seat. I am going to keep the stock headunit and just ad an amp and 2 subs.
EDIT: The reason I need this removed is because im going to run some wires from the stock amp to my aftermarket amp. My aftermarket amp is going to be under the drivers seat. I am going to keep the stock headunit and just ad an amp and 2 subs.
#7