When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I will possibly be removing my a-pillars in my 99 ram to replace the tweeters soon. I have only glanced intot he truck but I didn't really see exactly how they come out.
Anyone done this?
Also, is the drivers front seat just bolted on the floor with 4 bolts or is it attached to the center console?
I think the drivers side on mine just pulls off and the passenger side has 2 bolts through the grab handle that you have to take out. I'm thinking they are torx screws. Then I think it comes off. Don't hold me too it but I think that's how mine came off. I do have the tweeters btw. They just snap out once you get it off. Oh, once you get it unsnapped you have to disconnect a plug before taking it completely off. This plug is for the tweeter. Be careful not to break the tabs as I've broken some on mine but it still stays up there fine.
You have 3 screws on the door panels and then it poops off
you take out the four bolts holding the seat and unplug your seatbelt wiring ,seat motor etc
Be gentle when reinstalling the a-pillar piece, the plastic can be brittle on an older truck. I broke one putting mine back in. I wasen't getting rough, but it cracked anyway.
Be gentle when reinstalling the a-pillar piece, the plastic can be brittle on an older truck. I broke one putting mine back in. I wasen't getting rough, but it cracked anyway.
Flip the crack piece over and use a soldering gun to melt the pastic back together