[LilSparkPlug]

Here's better pictures and a mods list:

Here's a full mods list for those interested. Some stuff I'm still waiting to install:

Exterior:
- 18x7.5 Zinik Z18 Minardi Forged 2 piece wheels, Black w/Stainless lip
- BFG G-Force Sport Tires 235/40ZR18
- CBD Fiberglass Shorty style eyelids (painted FB)
- CBD Fiberglass Rear Diffuser (painted FB)
- TruFiber Fiberglass Mini Cuda Hood (painted FB)
- Calipers Painted Cast Iron
- Rock Blocker tinted foglight film
- Black Housing Headlights with Custom OEM HID Retrofit including Valeo H7 Projectors and custom bezel/shroud
- 5% Tint (back 3) 20% Tint (front 2) with the help of Sunset Tint Co.
- Factory Taillights painted Black with VHT and UPOL Clear
- Factory Sidemarkers painted Black with VHT and UPOL Clear
- Factory Intercooler Painted Black
- Zzap Shorty Black Billet Antenna
- Mopar Hoodpins and Cables
- Rolled Rear Bumper
- Ramsey Family Racing Bumper flares
- Mopar Pentastar RH Fender
- Custom Panther Pink (FM3) and Flat Black Paint Job done by me
- Custom Painted M3 Mirrors Panther Pink Mirror/Flat Black Base
-Carbon by Design Carbon Fiber OEM Style Hood painted flat black **winter only**


Fuel:
-Boomba Fuel rail – Anodized Black
- TK Motorsports Return Line and Regulator
- Fuel Injector Clinic 725cc Injectors
- Walbro 255LPH Fuel Pump
- AGP Billet Pawns
- AGP Fuel Rail spacers

Performance:
- Mopar Stage 3 FP Green Turbo
- 3" Mandrel Bent Custom Made Side Exit Exhaust System 'Cuda Style
- CTI 3" Oxygen Sensor Housing
- CTI 2.5" Charge Pipe w/Hemi Orange Powdercoating
- Mopar Stage 1 Computer
- Mopar Short Throw Shifter with Mopar Viper STS Shift Knob
- Mopar 7.5mm Spark Plug Wires with NGK 4306 plugs
- Mopar Stage 2 Wastegate
- Perrin Silicone Short Ram Intake System
- Crane .0014 cams
- Unorthodox Racing Cam gears
- MPX 62mm Throttle Body and spacer
- AGP Cold and Hot side Pipes w/T-Bolt Clamps
- HKS SSQ BOV
- TKMS CT-14 Oil pump and gears
- Gates Performance Timing Belt
- DCR Billet Timing Tensioner
- AGP Oil Accumulator
- AGP Aluminum Coolant Overflow tank

Tuning:
-DiabloSport Predator
- AEM UEGO Wideband
- Prosport Fuel Pressure gauge
- Prosport Exhaust Gas Temperature gauge
- Prosport Oil Pressure gauge
- Aeroforce Interceptor Scangauge
- VEI Systems Digital LED Boost gauge
- Greddy Profec –B Spec II Electronic Boost Controller
-Tip Sensor lines removed

Sounds:
-Jensen 7" In-Dash DVD Player
- Factory Kicker System
- XM Radio

Lighting:
-4300k H7 HID Kit for Retrofit
- 3000k H3 HID Kit for Foglights
- Valeo H7 HID Retrofitted Custom made headlights
- Projector foglamps with white halo ring
- Varad White Underbody LED kit
-Foglights converted into Running lights

Interior:
-Custom made Black leather/Pink piped Armrest
-Custom made Black leather/Pink piped Shift boot
-SRT-4 Embroidered into seats
- Viper ACR Harness pass-throughs
- Dash matched A/B/C Pillars
- Triple Pillar Pod
- Black dyed Headliner and visors
- Panther Pink Accents: HVAC, CD Bezel, Instrument cluster bezel, Seatbelt Anchors and covers
- Mopar door entry guards
- Cool White/Blue LED Intstrument Panel Lighting/HVAC Lighting/Odometer Lighting
- Warm White/Pink cupholder lighting
- Oznium.com Pink LED Rocker switches
- Fire extinguisher painted Panther Pink
- Custom Re-Upholstered trunk including:
Rear deck re-upholstered in black, tether strap covers and holes deleted
Back of backseat's re-upholstered in black
Entire trunk carpet done in black
Spare tire cover done in black with pink binding
Decklid carpet done in black with Pink Embroidery, center built up with foam to delete the contour.
Cargo mat with rubber backing (factory floor mat backing), embroidery, and pink binding.
Kicker sub trim ring painted Panther Pink


Suspension/Handling/Brakes
- Mopar S1 Lowering Springs
- ATE DOT 4 Super Blue Racing fluid
- Mopar Rear Tension Struts
- Mopar Stage 1 Front and Rear Rotors Cadium Coated, In Black with Hawk Carbon Fiber Pads
- Boomba Rotor Covers in Polished Natural finish
- Mopar Performance Adjustable Rear Control Arms
- Energy Suspension Full Black Hyperflex Bushing Kit in Black
- Mopar Performance Camber Bolt Kits Front/Rear
- Mopar Performance Steel Front Strut Tower Brace powdercoated Semi gloss black
- Mopar Performance Steel Rear Strut Tower Brace powdercoated Semi gloss black

Miscellaneous:
- Cobra Radar Detector
- Custom made "AAR" front emblem
- "Cuda'" rear emblem

Cooling/Injection:
-DEI Cry02 Intercooler sprayer
-JMB Radiator hardpipe PC'd Hemi orange
-Perrin upper/lower radiator pipes
-Koyo Performance Race Aluminum Radiator
-180 Degree Stant Thermostat w/Fan Switched on at all times

Engine Dress-Up/Misc. Engine Parts:
- AGP Solid Upper and Lower Motor Mounts
- Crankcase Breather
- Flat Black/Silver Injector Cover
- Hemi Orange Powdercoating:
Valve Cover
Intake Manifold
Throttle Body Spacer
Motor Mount/Motor Mount Block
Upper/Lower Thermostat Housings
- GG Coilpack Heatshield painted Flat Black
- Flat Black Exhaust Manifold heat shield
- Viper SRT-10 Oil cap
- Billet "Mopar" Coolant Cap
- JMB Aluminum "SRT-4" Radiator Gap Cover
- Hood Hinges Powdercoated Flat Black
- JMB Transmission Cover Powdercoated Flat Black
- Stainless Steel Polished Timing Belt Cover
- Stainless Steel Washer Fluid Cap Cover
- Stainless Steel Coolant Overflow Resivor Cap Cover
- Stainless Steel Oil Dipstick handle cover
- JMB Performance Brushed Aluminum Fuse Box Cover
- JMB Performance Polished Radiator brackets
- Factory Oil pan Powdercoated Semi Gloss black