how much boost can the hemi handle?
#1
#2
8psi should be ok. Just make sure you have a proper tune for it to keep the timing low and the mixture a little rich under boost.
I would ask Procharger to verify, but usually the kits are designed and tested on a stock engine, or they would have to tell you up front that internal mods are needed.
I would ask Procharger to verify, but usually the kits are designed and tested on a stock engine, or they would have to tell you up front that internal mods are needed.
#3
#6
#7
your going to blow seals and gaskets out the wazoo it can only take 2psi on stock gaskets and the internals will get annihilated with that much boost plus you will have to get different injectors and different coil system it is going to be alot more then just slapping a charger on..
Trending Topics
#8
take a leaf blower and pull your air box off and turn your truck on that about that your gunna get you can hear and see the truck struggle.. unless they have something that will adjust the setting in the ecu i dont think 8 psi will be what you will get it .. and whats wrong with my signature
#9
so i just looked at the procharger site and it states that the boost specified is at the peaked performance. and i like how they add the heat transfer info in small print too. when we put the charger on my wifes car we had to change a few things around thats why im skeptical about it being a bolt on turn key system.. i trust procharger 150% but there is something left out some where.. i am puzzeled i guess i would have to see the specs on paper. but thats just me ... anyway sorry for the thread jack.. i would replace your head gaskets and intake gaskets see if you can find 4 layer head gaskets.. i would also run a cooler spark plug as well.. just to be on the safe side.
#10
Join Date: Jul 2007
Location: South Georgia/East Florida
Posts: 24,686
Likes: 0
Received 20 Likes
on
19 Posts
I'm thinking about 5 psi, you'd need something like the stage 0 SRT-4 injectors, and I'd damn sure do a 3 gauge pillar and put a wideband, boost and fuel pressure gauge in it.
I think SCT is doing custom tunes for both the Procharger & STS systems.
Oh and one more thing, you do the above and don't have 4.56 gears and a higher stall converter, then you are pissing your money away...
I think SCT is doing custom tunes for both the Procharger & STS systems.
Oh and one more thing, you do the above and don't have 4.56 gears and a higher stall converter, then you are pissing your money away...
Last edited by HammerZ71; 01-16-2009 at 07:37 PM.