When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
alirght so im out and ive cut my air horns off my tb and im working on the rest of it and i was just wodnering how to i get the shaft out of it? ive alread taken the butterfly plates off now i just need to get the shaft out...help would be appreciated!
just grad the shaft on the throttle line hook up(oppsite side of the tps) and pull it out,,, i will feel like it will not at frist but it will, it a little hard at frist but it will, make sure you have room you don't hit no thing with you arm.
well i got it out with a good tug, there was just to much crap in t he way..but its out, i removed the fins and i worked on smoothing it more tonight, and tomorrow im going to my dads shop to bore it and thin out my butterfly plates...