well I went and got some feeler gauges and a caliper for the lack of people selling micrometers on sunday. the stock size for the jounal is supposed to be 2.0076"-2.0082" and what I read from the caliper was 1.981". I know they aren't as accurate as a micrometer, but it can't be too off either. If anything it should be reading higher than it really is because it has to be perfectly parallel to get a good reading and it could have opened a little when taking it out. They don't make an oversize bearing for that size. it's roughly .003" to much to work with a .75mm US and .007" to small for the .5mm US to work. I guess it's just telling me that I need to just start over with another crank.
Bet you are glad you didn't buy this one of me now indiana
