What are the steps to remove struts on 06-09 ram 1500 4x4?
#1
#2
Remove nut/bushing/plate for sway bar end link. Remove nut for tie rod end, and pop tie rod end loose from knuckle with a bfh. Loosen 3 nuts on top of strut. Loosen bolt/nut attaching strut to lower a arm. Support lower a arm with a jack. Remove nut from ball joint on upper a arm. Smack the side of the knuckle, near the ball joint, with a bfh until the ball joint pops free. It should pop out after a few good wacks. Remove three nuts from top of strut. Remove nut/bolt from lower strut mount. Slowly drop jack supporting the lower a arm. let the whole thing sag down and remove the strut. Reverse to install. You may need a spring compressor to fit the new strut back in. Get an alignment before you drive the thing too much.