Help! Changed Battery now it won't start!!
#1
Help! Changed Battery now it won't start!!
98 Durango 5.2L 190,400 miles and YES there is gas in it... LOL!
Okay Battery was dead after sitting two days, got charger out and hit with a 100 amp start and would'nt start. So I left it to charge. Checked back on it and Battery would not take a charge, so I went and got a new one and engine cranks but won't start.
After attempting to start I left the key on, the low fuel light came on and the odometer began blinking??
Also the security light is illuminating even afetr I hit the unlock button
Checked for pressure at the fuel rail and occasional it will shoot out and othertimes it will dribble, I do not hear the pump fire up although the fuel gauge comes up, but not to where it should be??
Relays and fuses in PDC checked and work
Any Ideas would be greatly appreciated..Thanks
Carl
Okay Battery was dead after sitting two days, got charger out and hit with a 100 amp start and would'nt start. So I left it to charge. Checked back on it and Battery would not take a charge, so I went and got a new one and engine cranks but won't start.
After attempting to start I left the key on, the low fuel light came on and the odometer began blinking??
Also the security light is illuminating even afetr I hit the unlock button
Checked for pressure at the fuel rail and occasional it will shoot out and othertimes it will dribble, I do not hear the pump fire up although the fuel gauge comes up, but not to where it should be??
Relays and fuses in PDC checked and work
Any Ideas would be greatly appreciated..Thanks
Carl
#2
#5
#7
Thorze. I have a similar problem with mine. I had the battery die before and MAN I thought CHRISTINE some how posest the Durango!LOL!! The lights were going off and on. Every relay was clicking, the gauges were freaking out!!!! Well got a new battery hooked up, turned key over and all it would do is turn over, no fire! Put key back to off and tried again, it fired right up. Everytime I disconnect the battery for some reason, I always have turn the key to start for a few secounds and than back to off, then to start again and it fires right up. HOPE THIS HELPS!!!
Trending Topics
#8
#9
Okay Guys, I got the Pump off ebay and disassembled the module and reinstalled the new pump**CAUTION** this is not an easy job to do as you must modify a couple of things but is very do-able (PM FOR FURTHER INSTRUCTIONS)
I just put the tank in and lifted it enough to check it before I finish the install, cranked on it and nothing, no pressure at the fuel rail and I can not hear the pump pressurize at all.
Could it be the crank position sensor, as I have rechecked all of the relays and they are good.
Any Wisdom would greatly be appreciated!!
I just put the tank in and lifted it enough to check it before I finish the install, cranked on it and nothing, no pressure at the fuel rail and I can not hear the pump pressurize at all.
Could it be the crank position sensor, as I have rechecked all of the relays and they are good.
Any Wisdom would greatly be appreciated!!