So i have been thinking of things i can do to my mag V6 since its out. The stoke Bore/Stoke is 3.91x3.31in. If you stroke an engine you have to get new connecting rods correct? i want to do a .030 over bore but i dont know if i should keep stock stoke or not? What do you guys think.
Thanks
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on Dodge Forums!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
Location: Sycamore, Illinois (displaced to Arkansas)
Posts: 3,688
Aside from locating those two missing cylinders...
I don't know much about internal stuff we can do to it, V8 throttle bodies are popular.
__________________
If parts ain't flyin', you ain't tryin'.
If it ain't broke, fix it 'til it is!
2009 Toyota Corolla S, 1.8L, 5-speed - the daily driver.
1996 Dodge Dakota, 4x4, extended cab, 3.9L, automatic. - my baby
I agree on those missing cylinders lol. Its just for the cost of gathering a 5.2L mag and components i could just mod my mag V6 since i got it for close to free. I do want to build a 390 from a 318 but not for this truck. I found fare priced pistons stoked and none. I just dont know what all is apart of stroking vs keeping stock stroke?? What do you know about V8 throttle bodys?
So upon further reading i answered my own question. If i want to bore the block and get sroker pistons i have to get a stroker crank haha duh. So i think im just going to do a .030 overbore and get some better connecting rods and keep stock stoke and she should have some more power . I will post on this as soon as i get her down to the block and bored hopefully this weekend i will strip her down.
if your gunna bore it, why not make it a stroker? your going through the work and your gunna have everything apart already.... stroker kits arent THAT expensive...
__________________
"Suckin' Gas, Haulin' Ass"
Quote:
Truck: 1993 Dakota LE 239ci MPFI V6 Mag, 3.5 8.25 rear, 264,xxx KMs (164,xxx Miles) Mods: 180 Thermostat, Hughes Plenum fix, 12" Alpine Type R Sub, 600W Dual Amp, JVC HU
Well because its a V6 i dont know where i can get a stroker crank for it? And i dont know if its internally or externally balanced? And the price is almost twice between the two? If you know where i can get one i might do it.
I don't think you can. Unless you get a chop saw and cut off 2 cly section. Internal I beleive. It is the same as a 5.2. I belive http://www.hughesengines.com/Index/index.php has V6 performance parts.
__________________ My Youtube Videos!
"No truck should ever be lowerd! NEVER"
3.9L Mods
. I will post on this as soon as i get her down to the block and bored hopefully this weekend i will strip her down.
