Skid Plates! - Page 3

skyshark186 · #21 10-20-2009, 05:04 PM

Neato. What were the other two big things?

This ad is not displayed to registered and logged-in members.
Register your free account today and become a member on Dodge Forums!

Crazy4x4RT · #22 10-21-2009, 02:13 AM

Just made a thread on it. http://dodgeforum.com/forum/1st-gen-...-new-toys.html

LO 619 · #23 10-21-2009, 05:01 PM

My skid plates are stock but it's missing the skid plate that covered the fuel tank and man... the ones I have are banged up like crazy! I actually want to replace the front skid plate because When I remove the lower front valance it's going to be noticable the bolts are just sticking out.

I like the one you had originally on the front (i guess aftermarket) and would be great on mine, where would I get that?

Crazy4x4RT · #24 10-21-2009, 06:09 PM

The front one I made. I just got a steel plate and drilled some holes and bolted it up. It is still there. These new (to me) are underneath.

LO 619 · #25 10-21-2009, 06:31 PM

Quote:

Originally Posted by Crazy4x4RT

The front one I made. I just got a steel plate and drilled some holes and bolted it up. It is still there. These new (to me) are underneath.

Well damn. If I ever come across a piece of sheet about that size and thickness I'll know exactly what to do with it. Yeah the front stock plate just barely comes up under the intake, I can probably take mine out and try and hammer it into shape and then spray it black.

ps. I like the shield/brushguard on yours and the front hitch. When that winch is on it's going to look killer.

Crazy4x4RT · #26 10-21-2009, 09:57 PM

Thanks! If you wanted most welding shops carry scrap pieces. I payed $10 for that one.

LO 619 · #27 10-22-2009, 12:48 AM

I may have to copy you then... It does have that off road feel to it. I was looking and I noticed that it covers the intake and bolts to the bumper, I have a shield on my truck too if I could weld I'd weld a peice of sheet in between the shield that would look awesome.