What Tranny Do I Have?
#1
12-02-2010, 12:44 PM
Join Date: Aug 2010
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
#2
12-02-2010, 01:06 PM
Professional
Join Date: Mar 2010
Location: Orlando, FL
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
You have the 42RH transmission. Do you have a 10 ton shop press? You'll need it when you're trying to replace the clutches in the overdrive unit. There's an 845 ft/lb coil spring that keeps the direct clutch applied at all times. Without the press, you'll never be able to safely rebuild it.
Last edited by misfitdakota_95; 12-02-2010 at 01:08 PM.
#3
12-02-2010, 02:22 PM
Hall Of Fame
Just incase you didn't see my post in your other thread, I will repost it.
The 92 V6's came with the 42RH. V8's were the 46RH. It is listed in the FAQ in this section. The 96 is slightly different, it is a 42RE. It is not the same so the 96 book will not work for you. The E is for Electronic controlled. The H is Hydraulically controlled.
We have a 42RH rebuild manual as well as the factory service manual for 95 with has a 42RH.
We have a 42RH rebuild manual as well as the factory service manual for 95 with has a 42RH.