4.7l PCV valve - DodgeForum.com



1st Gen Durango 1998 - 2003 Durango's

4.7l PCV valve

Reply
 
 
 
Thread Tools Search this Thread
  #1  
Old 05-14-2007, 06:47 AM
JJ67RS JJ67RS is offline
Thread Starter
 
Join Date: Sep 2004
Location:
Posts: 25
Default 4.7l PCV valve

Just a quicky here, replaced my PCV valve today. I know lots of people have had problems with these. Located on the bottom left side of the oil filler neck when looking straight at it. I found the easiest way to replace it was to 1) Pop off the air filter lid off, and push to the side, 2) pull hose off of PCV valve with a pair of pliers, 3) I used a pair of angled spark plug boot pullers to twist the pcv 180 degrees going counterclockwise, but similar shaped needle nose would work. 4) then just pull straight out...Was very easy, literally took 5 minutes. good luck...
jay
Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
1996 Ram1500 RWAL Valve Switch? Relsom 2nd Gen Ram Tech 4 09-12-2015 01:53 PM
PCV Valve MoparMack 3rd Gen Ram Tech 3 09-11-2015 10:02 PM
2002 Dakota engine ticking/knocking HELP PLEASE John Curran 2nd Gen Dakota 2 09-07-2015 09:30 AM
Valve clatter and P0171 code jamesnb 2nd Gen Ram Tech 2 09-01-2015 01:42 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -4. The time now is 02:36 PM.