99 D 5.9l rocker arm noise.
06-07-2010, 01:24 AM
Registered User
Thread Starter
Join Date: Jan 2010
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
99 D 5.9l rocker arm noise.
i beleive that its my rocker arms making the noise im hearing. i need to know how to tell which ones it is once i have the valve cover off. plus how to go about replacing them and adjusting them. any help would greatly be apreciated. i am very good at working on engines but this is something i havent done before so i obvously need some direction to not ruin my engine. thanks, leif.
06-07-2010, 07:50 AM
Join Date: Jan 2007
Location: Union NJ
Posts: 19,791
what noise are you hearing? if you share that we might be able to confirm your diagnosis or point you to something cheaper.
06-07-2010, 12:29 PM
Join Date: Jun 2005
Location: Riverton, UT
Posts: 14,228
There is no adjustment on a 5.9L engine. If you have an issue with a rocker you need to pull it out and replace the Pushrod and Rocker (also tapet if bad) then torque the bolt on the rocker to 21 ft lbs torque.
06-08-2010, 02:34 AM
Registered User
Thread Starter
Join Date: Jan 2010
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
thanks. when its first started until it goes back down to idle theres a rapping sound. if theres no load on the motor and its reving the noise is louder. i can hear it when driving next to parked cars or whatnot. but if nothing is around then i cant hear it.
06-08-2010, 11:13 AM
Join Date: Jun 2005
Location: Riverton, UT
Posts: 14,228
Could be a spark plug or blown Plenum Gasket. Are you using more oil than usual?
06-08-2010, 03:36 PM
Registered User
Thread Starter
Join Date: Jan 2010
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
the intake manifold has been replace. the gaskets are fine. the plugs were replaced lastyear. its done it since we have got it. and thru everything thats been done to it the noise is still their. yeah she has been using oil. always has.
06-08-2010, 06:23 PM
Join Date: Jun 2005
Location: Riverton, UT
Posts: 14,228
Sounds like you know for sure it's not a Plenum Gasket. If you think it's fuel related try a octane level up at a Chevron station and see if it goes away?
If not guess you need to look at the rockers.
06-08-2010, 08:56 PM
Registered User
Thread Starter
Join Date: Jan 2010
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
ive ran octain booster thru it before. and the sound was still there. yeah im gonna look at it within the next week. how would i tell which parts are problematic once ive got the valve cover off?