1st Gen Durango 1998 - 2003 Durango's

Dome light problem

Thread Tools
 
Search this Thread
 
  #1  
Old 12-10-2010, 05:37 PM
400m's Avatar
400m
400m is offline
Registered User
Thread Starter
Join Date: May 2007
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default Dome light problem

My 03 Durango will only turn on my dome lights when the drivers door or rear hatch is opened. If I open any of the other passenger doors, my dome lights will not turn on. Where do I start?
 
  #2  
Old 12-10-2010, 09:07 PM
shrpshtr325's Avatar
shrpshtr325
shrpshtr325 is offline
THE ULTI-MOD
Join Date: Jan 2007
Location: Union NJ
Posts: 19,793
Received 33 Likes on 31 Posts
Default

i would start by checking the switches in the doors, and the wiring, and in the meantime i am going to ask if you have had any other weird electrical issues which seem unrelated (ANYTHING ELECTRICAL AT ALL???) if you have other electrical problems i would look into the CTM being the problem.
 
  #3  
Old 12-11-2010, 12:34 AM
WhiteWidow00's Avatar
WhiteWidow00
WhiteWidow00 is offline
Record Breaker
Join Date: Jun 2010
Location: St. Petersburg, Florida
Posts: 1,743
Likes: 0
Received 0 Likes on 0 Posts
Default

Does the "Door Ajar" light in your gauges come on when you open one of the other doors? If not there's your problem.
 
  #4  
Old 12-11-2010, 01:41 PM
400m's Avatar
400m
400m is offline
Registered User
Thread Starter
Join Date: May 2007
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default

WhiteWidow00: No, the door ajar light does not work on an of the other 3 doors. I checked the 2 20amp fuses in the power dist. block last night, both OK. I think I might have it narrowed down to the CTM or a break in the tan/red wire. Should I try an impedance test on this wire? Can anyone tell me where the CTM is and how the wire travels through the vehicle?
 
  #5  
Old 12-11-2010, 03:52 PM
400m's Avatar
400m
400m is offline
Registered User
Thread Starter
Join Date: May 2007
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default

Also, the only other electrical problem I have is that the drivers seat warmer stopped working. Passenger seat works (Wife's happy). I'm pretty sure I just need to roll the leather back and repair the broken wire.
 
  #6  
Old 12-11-2010, 04:42 PM
shrpshtr325's Avatar
shrpshtr325
shrpshtr325 is offline
THE ULTI-MOD
Join Date: Jan 2007
Location: Union NJ
Posts: 19,793
Received 33 Likes on 31 Posts
Default

yea the heated seat is a broken wire in the heater element, not related, i would check the wiring for a break before jumping to the ctm conclusion, an ohm meter will help alot with this, especially one w/ beeping continuity check
 
  #7  
Old 12-11-2010, 07:24 PM
400m's Avatar
400m
400m is offline
Registered User
Thread Starter
Join Date: May 2007
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks shrpshtr325, I'll see if I can find a break (I hope so). I'll let you know what I find. I appreciate the help.
 
  #8  
Old 12-11-2010, 09:23 PM
WhiteWidow00's Avatar
WhiteWidow00
WhiteWidow00 is offline
Record Breaker
Join Date: Jun 2010
Location: St. Petersburg, Florida
Posts: 1,743
Likes: 0
Received 0 Likes on 0 Posts
Default

I have the same problem with my drivers door. I'm pretty sure it's the part that lets the vehicle know when a door is open or not. Have yet to find a fix for this that doesn't require replacing the door latch.
 
  #9  
Old 12-12-2010, 12:18 AM
hydrashocker's Avatar
hydrashocker
hydrashocker is offline
Hall Of Fame
Join Date: Jun 2005
Location: Riverton, UT
Posts: 14,228
Received 16 Likes on 15 Posts
Default

The driver door ajar switch cannot be repaired and, if faulty or damaged, the door latch unit must be replaced.
 
  #10  
Old 12-12-2010, 04:00 PM
WhiteWidow00's Avatar
WhiteWidow00
WhiteWidow00 is offline
Record Breaker
Join Date: Jun 2010
Location: St. Petersburg, Florida
Posts: 1,743
Likes: 0
Received 0 Likes on 0 Posts
Default

Like hydra said the latch mist be replace. I would start by probably replacing a door latch on one of them (cost about 70$ for the latch and like an hour of your time) and if that works there's your problem.
 


Quick Reply: Dome light problem



All times are GMT -4. The time now is 12:15 AM.