wheel bearing
#1
#2
#3
The bearing is $230 or if not ABS then about $130. Labor should only be about 1-2 hundred, but depending where ya buy the parts. These are great prices I quoted you.
4X4's regardless have to have the entire hub replaced. 2wd Durango's have just bearings at about $32.
4X4's regardless have to have the entire hub replaced. 2wd Durango's have just bearings at about $32.
Last edited by hydrashocker; 08-30-2010 at 05:55 PM.
#4
#5
****
I just said that was good prices (meaning I've been around the block looking for MANY of members) and that there are 3 different kinds. There was nothin to do with me selling anything or owning a shop, just the cold hard facts. That's about the best prices he is going to find is all I'm sayin and the fact that a wheel bearing for $800 was WAY out of the ball park!
I just said that was good prices (meaning I've been around the block looking for MANY of members) and that there are 3 different kinds. There was nothin to do with me selling anything or owning a shop, just the cold hard facts. That's about the best prices he is going to find is all I'm sayin and the fact that a wheel bearing for $800 was WAY out of the ball park!
#7
Trending Topics
#9
Thanks to all who replied ! A shop here in town is doing it for about 350, I dont know where the guy who wants 800 is from but it aint anywhere I want to be. I was going to see if I could get the parts and do it alone, but im sure a bearing press and other parts are necessary that I dont have. I just hope I can drive on it for a while before it fails. Thanks again!
#10