Engine Misfiring/stalling while idling/driving. MIL on
#1
Engine Misfiring/stalling while idling/driving. MIL on
About a week ago my check engine light came on for the first time. I thought nothing of it until it started to flash one day and I noticed my durango running rough. I ran a diagnostic tool and 5 codes came up.
P1281, P0300, P0305,P0307, and P0308.
Since this has happened I've had my Fuel injectors cleaned, oil changed and cleaned my spark plugs.
Any idea what it could be with these readings?
P1281, P0300, P0305,P0307, and P0308.
Since this has happened I've had my Fuel injectors cleaned, oil changed and cleaned my spark plugs.
Any idea what it could be with these readings?
#2
the last 4 are misfire codes which is why the CEL was flashing, it does this whenever it detects a bad enough misfire, its a warning to shut the engine off before it causes any damage.
I would start by replacing the plugs (all 8 of them) with champion copper core plugs gapped to .040
as for the 1281 that is the engine taking too long to heat up, probably a thermostat stuck open, not knowing which engine you have this is all the details we can give.
I would start by replacing the plugs (all 8 of them) with champion copper core plugs gapped to .040
as for the 1281 that is the engine taking too long to heat up, probably a thermostat stuck open, not knowing which engine you have this is all the details we can give.
#3
#5
#6