I have a 2003 4.7L Durango and am getting a code for a bad crank sensor. I know where the sensor is on a 5.2L engine, but where is it on the 4.7L? Looking in through the passenger side wheel well I see what looks like the sensor on the rear side of the block by the exhaust manifold. The picture for the sensor shows only 1 bolt hole and this is what I see through the wheel well. Is that it or does anyone have a picture that shows the sensor?

Thanks,
Danny

 

OK, I changed the crank sensor yesterday. It was the 1 bolt that I could see through the wheel well. Bolt was easy to get out. The sensor was a b1tch to get out! It took about an hour to wiggle and turn and pry to get it out.

Before I changed it I was getting 2 codes: P0300 and P0339. After changing the sensor, the P0339 went away but the P0300 (multiple misfires) came back. My next step is to check the plugs.