On my 2001 Dodge Durango the power door lock on the driver's side rear door does not lock or unlock when the electrical switch is activated. It does not lock when the automatic door lock feature is activated. To lock the door I have to manually slide the door lock slide lever on the inside of the door. Also, this also has to be done to unlock the door. Evidently the solenoid is not getting power or the solenoid is bad. (I assume there is a solenoid that does this action.). What is the procedure to check this out in order to determinethe problem? Is there a separate fuse for each door's power door lock?
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on Dodge Forums!
I am having the same problem It also occurred approximately the same time that my steering wheel radio controls and horn stopped working. I am not certain if they are related though. Did you everfind out anymore information about this problem?
Try disassembling the driver's door and reseat the wiring harness to your power locks and windows control unit. Alot of times, the harness may become loose or the contacts do not make good contacts causing the locks and/or windows issue.
Black 2000 Durango 5.9 R/T, Infinity Reference 6012i, Clear Headlight lens,
Fastman 52mm ThrottleBody,Fastman custom built Tranny,Castrol Full Syntec,
OEM K&N Air filter,Monroe Reflexes,BFG LongTrail Touring T/A's,180 Stat,
F1 Airgap Intake,Champion IR Truck Plugs,Custom Made Ram Air Intake, Hughes SCT Tuner
I have a 2002 Durango, and mine is similar to yours except that when I hit the lock or hit lock on my remote it doesn't lock but it also makes like a "sick goose noise." I have to manually push the lock itself down on the driver side door. All others work except it. Any suggestions? I have taken the panel off and don't see any problems. Help????