tranny question

95neon1025 · #1 08-05-2009, 07:41 PM

is it required to use the mopar atf? or can i use some **** from autozone?

This ad is not displayed to registered and logged-in members.
Register your free account today and become a member on Dodge Forums!

brucewin · #2 08-05-2009, 09:28 PM

I have always used syncromesh sold at autozone.Pennzoil

scraper neon · #3 08-06-2009, 03:44 AM

i would just use what is says which i beleve is mopar 3

spudsterier · #4 08-06-2009, 09:43 AM

you can use any tranny fluid that is ATF+3

Altima_wb · #5 08-07-2009, 03:37 PM

any auto tranny fluid as long as its ATF 3 or ATF 4 i'd recommend the atf 4 seen as its updated and its a synthetic... deff worth the upgrade.... but for sure don't use just any auto transmission fluid... its the fastest way to kill your tranny....

Ghost Neon 2 · #6 08-11-2009, 02:34 PM

What type of transmission does your neon have?

Altima_wb · #7 08-12-2009, 03:57 PM

thats a good question you never did say what tranny you had but seen as you were asking about atf I assumed you had an auto... but if manual you deff need to run syncromesh...

95neon1025 · #8 08-13-2009, 08:21 PM

its an automatic

das2123 · #9 08-20-2009, 10:52 AM

Any ATF+3 or +4 should work as long as it states it's compatible for Chrysler transmissions.

I_Ride_Neon · #10 08-20-2009, 03:10 PM

I run atf+3 in both the auto and the manual.