timing specs. for 360 engine - DodgeForum.com



1st Gen Ram Tech '93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

timing specs. for 360 engine

Reply
 
 
 
Thread Tools Search this Thread
  #1  
Old 04-05-2007, 12:52 AM
joruss joruss is offline
Thread Starter
 
Join Date: Apr 2007
Posts: 2
Default timing specs. for 360 engine

Does anyone have timing specifications for 1984 DodgeRam 3/4 Ton with 360 engine, 2 brl carb, auto trans. Please
Reply With Quote
  #2  
Old 04-05-2007, 07:54 AM
horatio102 horatio102 is offline
Champion
 
Join Date: Feb 2005
Vehicle: 98 12v, my 9th MOPAR
Location: Skagit County, WA
Posts: 3,692
Default RE: timing specs. for 360 engine

off the top of my head? I think my 86 was supposed to be at 8 degrees advance, but I could be wrong. I'd just start there and crank it until you get ping then back it off a touch.
Reply With Quote
  #3  
Old 04-05-2007, 08:22 PM
joruss joruss is offline
Thread Starter
 
Join Date: Apr 2007
Posts: 2
Default RE: timing specs. for 360 engine

thank you for that info, my big problem is with the California smog people they keep saying it should be 16BTDC which makes the truck run like you know what. so that can't be right. Guess I should just move back to Alabama with it. no smog check there. Joruss
Reply With Quote
  #4  
Old 04-09-2007, 08:11 AM
horatio102 horatio102 is offline
Champion
 
Join Date: Feb 2005
Vehicle: 98 12v, my 9th MOPAR
Location: Skagit County, WA
Posts: 3,692
Default RE: timing specs. for 360 engine

16?? that sounds way too far advanced for stock setup with 87 octane. Do the smog ***** actually check your timing??
Reply With Quote
  #5  
Old 04-13-2007, 09:45 PM
charlie1935's Avatar
charlie1935 charlie1935 is offline
Record Breaker
 
Join Date: Mar 2004
Vehicle: 96 Ram standard cab, short bed, 318 auto. tranny. 87 D100, long bed, 318 auto. 87 5th Ave. 318.
Location: DuQuoin,IL.
Posts: 1,977
Default RE: timing specs. for 360 engine

Quote:
ORIGINAL: joruss

Does anyone have timing specifications for 1984 DodgeRam 3/4 Ton with 360 engine, 2 brl carb, auto trans. Please
According to my Chilton's manual, Light duty 14 BTdc, Heavy duty with out catalyst 4 BTDC, Heavy duty with catalyst 10 BTDC.
Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Bad tranny issue, really bad LONEWOLF2007 2nd Gen Durango 5 12-06-2016 05:04 PM
Rock Auto Discount, use it or loose it Gone Fishin 3rd Gen Ram Tech 1 07-05-2016 07:49 PM
1994 5.9L gas has spark and fuel but won't start herche54 2nd Gen Ram Tech 13 07-17-2015 05:38 PM
2004 ram 1500 question dss56 3rd Gen Ram Tech 8 07-09-2015 10:01 PM
5.2L Short Block w Listed Parts rampuppy Archived Classifieds 3 07-08-2015 04:10 AM


Tags
1st, 318, 360, dodge, engine, gen, magnum, mopar, motor, smogging, specifications, specs, stock, timeing, timing

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -4. The time now is 06:04 PM.