1st Gen Ram Tech '93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

87 d100 parts truck

  #1  
Old 04-02-2008, 12:36 AM
javatman's Avatar
javatman
javatman is offline
Thread Starter
Join Date: Mar 2008
Location:
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Default 87 d100 parts truck

hello everyone i have a 1987 dodge d100 i havestripped parts off of to rebuild my 87 dodge d150 which is still a work in progress if you need a part and i have it i will sell it to ya.i still need money for other things i dont have usable parts for.i also have a complete engine i pulled myself out of a 82 dodge prospector which was running when i pulled it last year, i think it would be a good one to rebuild it is a 318(canadian built i think) the truck was used on a sweet potato farm most of its life. the 87 d100 still has the tranny in it and works good or it did when i parked it back in september 2007 i noticed the torque converter has slipped out somewhat and the fluid has drained everywhere after i pulled the motor and the cable i used to tie it up with strectched.the truck was used as a local pest control vehicle so it has been well used also. remember to think about shipping when you seek parts i live in northeastern mississippi. thank ya lots.
 
  #2  
Old 04-13-2008, 12:46 PM
javatman's Avatar
javatman
javatman is offline
Thread Starter
Join Date: Mar 2008
Location:
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 87 d100 parts truck

im gonna finish stripping this truck in the next few days then i am gonna hual it to the scrap yard i was told i could get like 150 bucks for the body and frame and that will be my new exhaust system....no more pulpwood truck sound yea! then i need a 4bbl intake and a carb for my little 318 and then paint this summer and new seat and so on.....anyways i wont be keeping the old parts truck .i hate to see it go but sacrifices have to be made for the better ofole bessy....
 
  #3  
Old 04-13-2008, 01:00 PM
moparborn's Avatar
moparborn
moparborn is offline
All Star
Join Date: Sep 2007
Location: Pittsburgh,PA.
Posts: 765
Likes: 0
Received 1 Like on 1 Post
Default RE: 87 d100 parts truck

Can we get some pics,interior,sides,rear,thanks.
 
  #4  
Old 04-13-2008, 01:17 PM
javatman's Avatar
javatman
javatman is offline
Thread Starter
Join Date: Mar 2008
Location:
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 87 d100 parts truck

im absent minded here are a few pics i just ran out and snapped
 
  #5  
Old 04-13-2008, 02:53 PM
1996Ram318's Avatar
1996Ram318
1996Ram318 is offline
All Star
Join Date: Dec 2006
Posts: 918
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 87 d100 parts truck

I would part it out, you`ll make much more than $150. The vent galss alone sells for $85, $150 per door. You can get alot more by selling parts.
 
  #6  
Old 04-13-2008, 02:56 PM
nemesis_SS's Avatar
nemesis_SS
nemesis_SS is offline
All Star
Join Date: Jan 2008
Location:
Posts: 861
Likes: 0
Received 1 Like on 1 Post
Default RE: 87 d100 parts truck

need a passenger side tailight
 
  #7  
Old 04-13-2008, 08:49 PM
javatman's Avatar
javatman
javatman is offline
Thread Starter
Join Date: Mar 2008
Location:
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 87 d100 parts truck

nemesis the tail light lens on both sides are no good they are broken up.the bulb sockets and wires are in good shape.also for any further inquiries from anyone the headlight doors/bezels are no good but the bulb sockets and wires are in good shape. the ones on my truck also had to be replaced i bought them from partstrain.com through their ebay auction for 15 dollars a piece for tail lights and i got the headlight doors for 12 dollars a piece ......
 
  #8  
Old 04-13-2008, 08:55 PM
javatman's Avatar
javatman
javatman is offline
Thread Starter
Join Date: Mar 2008
Location:
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 87 d100 parts truck

wow 1996Ram318 i had no idea those little windows were so high the ones i have are in good shape. does that include the handle or is that just for the glass itself? i guess 20 dollars a piece would be fair then huh!
 
  #9  
Old 04-14-2008, 12:17 AM
nemesis_SS's Avatar
nemesis_SS
nemesis_SS is offline
All Star
Join Date: Jan 2008
Location:
Posts: 861
Likes: 0
Received 1 Like on 1 Post
Default RE: 87 d100 parts truck

thanks anyhow man.
 
  #10  
Old 04-14-2008, 09:06 AM
javatman's Avatar
javatman
javatman is offline
Thread Starter
Join Date: Mar 2008
Location:
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 87 d100 parts truck

wow i posted some huge pics im gonna try to make them bigger so we can see better.
 

Thread Tools
Search this Thread
Quick Reply: 87 d100 parts truck



All times are GMT -4. The time now is 11:33 PM.