When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1st Gen Ram Tech'93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
good questions,sensor on axle could possibly be a speed sensor.
is the underhood vac diagram there? could be a vac cap or may be hooks to the air cleaner assembly.
Well possibly one down LOL. The diagram on the truck shows something different than what the current vacuum routing actually is......this could be good this could be bad.
Thank you SEAL. I should have thought of the ABS thing. The funny part is that the vacuum routing (physically) is routed the way the hanes manual shows it. The routing on the sticker under the hood is different than what is actually there. I am a little puzzled by this. The motor has low oil pressure when at idle and overheats easily. I guess I am going to have to break down and put a new motor in it. I found one at engines direct for 1225 with me using my own roller lifters, rockers, and push rods. the core is only 165. The company is local so I don't have to pay for shipping. My intentions are to rebuild the truck after I get a job LOL. The economy has put a lashing on me.