When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1st Gen Ram Tech'93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I was wondering if anyone ever, or is it possible to put a 78 grille/headlights, blinker, on my 1989 dodge w350 cummins turbo diesel... I like the front end on the 78, and i know a lot of the parts on these old dodges are interchangable. So can anyone else me out?
I'm pretty sure the sheet metal is a little different. You'd probably have some places to trim and fill, if the mounts would line up. You could always go all out and do a body swap.
Haha, i just did a body swap, and i dont think ill ever do it again unless i have to! did the bumpers, bed, doors, fenders, cowl, and hood. Huge pain in the ***.
i did a 78 to 81 body sawp and the grill lined up good....im not sure if the fenders/hood/bumper are the same but i think they are pretty close..... it all comes down to how much time you want to spend on your truck
I am interested in the same front end on my 86 all i have researched is that the grille will interchange but as far as fenders there in a body line on 81-93 that doesnt exsist on pre80
I didnt havent to swap the core support because all i did was use the body parts, nothing with the frame. I didnt do any engine swap or anything like that. This gasser body just had a better body than my diesel,and the 2 trucks were only a year apart. Its pretty simple getting everything apart, just a pain getting everything lined back up on the other truck.
alright, i just asked because i know on jeeps to swap to a gladiatior grille you need to either replace or modify the core support because you are going from square to round lights like a 78 grille on an 86 Ram