Working on a project here...a 1990 Power Ram with a 5.7 liter Hemi. I stripped it down to frame, durlined it and began rebuilding. I modified the engine mounts to accept an 04 5.7 Hemi. Now the problem...The freaking transfer case is one the wrong side. On the 1990 the transfer case goes to passenger side, while in 04 ram it goes to drivers side...What do I do now? can I just spin the transfer case 180 degrees and bolt it back down? or will the transfer case from my 1990 fit this tranny? please help...I made a huge mistake without checking this out first.
[/align]
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on Dodge Forums!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
Try looking for a axle with the pumpkin on the drivers side then.
__________________
Jim "Iron Giant" Fahlin ~ A high performance car is like a guitar, you have to tune it to achieve your best operation and pull ahead of the competition.
You should actually be able to flip it if your really just turning the output shaft towards as differnt side. The mounting will be differnt because you flipped it.
__________________
Dodge's are the meanest looking trucks on the road.
A Hemi Power Ram project..HELP!!!
