Dodge Stratus The Dodge Stratus. Whether you've got a sedan or coupe, base model or R/T, theDodge Stratus has winning looks and thrilling performance.

96 Stratus won't start, no spark, does get gas

Thread Tools
 
Search this Thread
 
  #1  
Old 12-06-2010, 08:53 AM
Imre's Avatar
Imre
Imre is offline
Registered User
Thread Starter
Join Date: Aug 2008
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default 96 Stratus won't start, no spark, does get gas

Hi!

I'm here in Budapest, it's been unusually cold, well below freezing -- the first below freezing morning car was hard to start, simply cranked and nothing for a bit, then started to catch and came on.

Then I parked it for a couple of below freezing days and it just cranks -- gets fuel but no spark.

Fuses seem OK -- didn't pull them, just appear not blown.

96 Stratus 2.5 V6

Any ideas?

Thanks in advance for your help.

Best,

Imre
 
  #2  
Old 12-06-2010, 11:35 PM
master tech's Avatar
master tech
master tech is offline
Site Moderator & Tech
Dodge Forum Moderator
Join Date: Apr 2007
Location: Near Sacramento,ca
Posts: 11,545
Likes: 0
Received 92 Likes on 78 Posts
Default

Check the wires going to the crank sensor. And here is something i tried here,blow dryer on the PCM.
 
  #3  
Old 12-07-2010, 06:21 AM
Imre's Avatar
Imre
Imre is offline
Registered User
Thread Starter
Join Date: Aug 2008
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks Master Tech!

Will try, car is down the street, I live of a hill and... well, will let you know.

Imre
 
  #4  
Old 12-07-2010, 06:25 AM
Imre's Avatar
Imre
Imre is offline
Registered User
Thread Starter
Join Date: Aug 2008
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Basic question: what's the easiest way to see the crank sensor and where is the PCM?

Thanx,

Imre
 
  #5  
Old 12-07-2010, 08:04 AM
Imre's Avatar
Imre
Imre is offline
Registered User
Thread Starter
Join Date: Aug 2008
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Is the PCM under the hood, at the fuse box, next to it on the left side? Is there a simple test for it?

As for crank sensor, is it at the bellhousing? I didn't have a flashlight, pretty small and dark area, do I have to remove much to get to it? Is there an easy way to check it?

Another warmer day tomorrow forcasted, hopefully the snow will be melted and I'll remove them.

Thanks again,

Imre
 
  #6  
Old 12-07-2010, 11:28 PM
master tech's Avatar
master tech
master tech is offline
Site Moderator & Tech
Dodge Forum Moderator
Join Date: Apr 2007
Location: Near Sacramento,ca
Posts: 11,545
Likes: 0
Received 92 Likes on 78 Posts
Default

The crank sensor is bolted to the transmission bellhousing, and the PCM would near the black box (PDC).
 
  #7  
Old 12-08-2010, 05:08 AM
Imre's Avatar
Imre
Imre is offline
Registered User
Thread Starter
Join Date: Aug 2008
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks Master Tech!

Does the PCM have an aluninum casing?

Imre

PS: That's a mighty, and I mean mighty, fine V10 !!
 



Quick Reply: 96 Stratus won't start, no spark, does get gas



All times are GMT -4. The time now is 01:50 AM.