Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Interior Guides
- Dodge Ram 2009-Present: How to Replace Blend Door Actuator
Step by step intructions for the do-it-yourself repairs.
Browse all: Interior Guides
blend door actuator
#1
#2
#4
#5
#6
Is your truck a 96? No blend door actuator motor for YOU! Cable operated. In the spot where the little motor is on the newer trucks, the axle for the blend door sticks out a bit. You should be able to feel it move as you cycle the temp control from hot to cold.
At one point, I had a bookmark to the procedure to adjust the cable. (and it was actually pretty easy.....) But, I am unable to come up with it now? It was posted right here on these forums, I think it was either J415, or ZMAN.......
At one point, I had a bookmark to the procedure to adjust the cable. (and it was actually pretty easy.....) But, I am unable to come up with it now? It was posted right here on these forums, I think it was either J415, or ZMAN.......
#7
OH!!! That makes me feel better... and worse hahah.. Im out of ideas to whats wrong now :P and yea i got a 96 lol... so if the system has been flushed, all new hoses... water pump has good flow(not over heating), new working t-stat... blend doors open and close.. blower motor is clean.. im at a total loss... there has got to e a reason my heat blows goats...
Last edited by offroadjosh; 01-06-2011 at 10:40 PM.
Trending Topics
#8
#9
#10
The ceramic thing is the blower motor resistor and here are the directions for adjusting the cable, from the 98 FSM.