3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

4.7 Rev Limiter problem?

  #1  
Old 01-30-2011, 11:54 AM
garider's Avatar
garider
garider is offline
Registered User
Thread Starter
Join Date: Jul 2010
Location: Georgia
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Question 4.7 Rev Limiter problem?

I am not familiar with the 4.7's. At what RPM does the stock limiter cut in? My nephew owns a '04 Ram 4.7 and on occasion the rev limiter will start cutting in at approx. 3400 rpms and will not rev any higher until he turns the switch off, then back on. The cruise will not work when this is happening either. After turning the truck off, then restarting it, it will rev over 4k when shifting out of OD to climb a long hill. Is the standard? 3400 rpm seems to be a bit early.

I searched the forum and found others that have had this problem, but no answer as to why it happens or if it is doing its job as it should?
 

Last edited by garider; 01-30-2011 at 01:36 PM.
  #2  
Old 01-30-2011, 04:02 PM
weedahoe's Avatar
weedahoe
weedahoe is offline
Hall Of Fame
Hall of Fame Member
Join Date: Mar 2009
Location: South GA
Posts: 19,166
Received 19 Likes on 18 Posts
Default

Usually we will get tuners like Diablo or Superchips to raise our rev limits.
 
  #3  
Old 01-30-2011, 04:29 PM
garider's Avatar
garider
garider is offline
Registered User
Thread Starter
Join Date: Jul 2010
Location: Georgia
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default

So what I described is normal for the 4.7?

The cruise won't work and it will continue to cut out at any rpm over 3400 until he restarts it. It may be a month before it happens again. What sets this trend off?
 
  #4  
Old 01-30-2011, 06:48 PM
chambers's Avatar
chambers
chambers is offline
Record Breaker
Join Date: Dec 2008
Location: VA
Posts: 1,605
Likes: 0
Received 1 Like on 1 Post
Default

That doesn't sound normal. The rev limiter should be above 5500, I think it's at 6100 or 6200 stock. I'm not sure what the cause is, is it only happening when the cruise control is active?
 
  #5  
Old 01-30-2011, 07:51 PM
garider's Avatar
garider
garider is offline
Registered User
Thread Starter
Join Date: Jul 2010
Location: Georgia
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by chambers
... is it only happening when the cruise control is active?
No. He never knows when it may happen. I think it's happened 3 times in the last 6 months. He figured out that he could just turn the key off, back on and it would be fine.
 
  #6  
Old 01-30-2011, 08:24 PM
Buggsy's Avatar
Buggsy
Buggsy is offline
Professional
Join Date: Oct 2010
Location: Eau Claire, WI
Posts: 215
Likes: 0
Received 0 Likes on 0 Posts
Default

If it makes any difference, I think the rev limiter is right around 3500 - 4000 in park. When in gear at wide open throttle, you shouldn't hit anything until red line.
 
  #7  
Old 01-30-2011, 08:33 PM
outcast's Avatar
outcast
outcast is offline
Professional
Join Date: Jun 2010
Location: nevada mo
Posts: 152
Likes: 0
Received 0 Likes on 0 Posts
Default

my truck dont have one it hits 6000 all day long its funny when a hemi truck in town tries to rev his **** up at me and only hits like 3 then i blow his ear drums out at 6
 
  #8  
Old 01-30-2011, 09:15 PM
garider's Avatar
garider
garider is offline
Registered User
Thread Starter
Join Date: Jul 2010
Location: Georgia
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default

This happens under load while driving. Usually shows up when the tranny downshifts out of OD pulling a hill.
 
  #9  
Old 01-30-2011, 11:03 PM
SeanW727's Avatar
SeanW727
SeanW727 is offline
Professional
Join Date: Jan 2006
Location: Sewell, NJ
Posts: 202
Likes: 0
Received 0 Likes on 0 Posts
Default

rev limiter is roughly 5900 RPMS... .MY 2001 dakota would rev to 6k with the 4.7... my 2004 Ram revs to 5800/5900 (Cant really tell to be honest) .... This does not however sound normal. I do not know what will correct your problem though.
 
  #10  
Old 01-30-2011, 11:55 PM
Matt99's Avatar
Matt99
Matt99 is offline
Champion
Join Date: May 2008
Location: Shreveport, LA
Posts: 4,210
Likes: 0
Received 0 Likes on 0 Posts
Default

my rev limiter is super low. I dont know an exact number but Im guessing somewhere around 4k
 

Thread Tools
Search this Thread
Quick Reply: 4.7 Rev Limiter problem?



All times are GMT -4. The time now is 03:42 PM.