2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

95 dodge ram 5.2L how to set the timing?

  #1  
Old 02-09-2011, 01:10 PM
suburban99's Avatar
suburban99
suburban99 is offline
Registered User
Thread Starter
Join Date: Jul 2010
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default 95 dodge ram 5.2L how to set the timing?

Hey all, son's truck...idles good but not much power... suspect timng? no codes. What do you think?
 
  #2  
Old 02-09-2011, 01:31 PM
bigdaddyjr's Avatar
bigdaddyjr
bigdaddyjr is offline
Registered User
Join Date: Feb 2011
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

have you tried a tune up plugs wires cap rotor? did this come on all of a sudden or over time
 
  #3  
Old 02-09-2011, 04:13 PM
suburban99's Avatar
suburban99
suburban99 is offline
Registered User
Thread Starter
Join Date: Jul 2010
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

Plugs yes, wires and cap are coming...truck has been sitting about 2 years...inside of cap has white stuff attached to the pins...corrosion maybe..tried to clean it but no avail. #8 plug completely fouled and not firing. Wires are suspect. Idles amazingly well.
 
  #4  
Old 02-09-2011, 04:24 PM
PurplDodge's Avatar
PurplDodge
PurplDodge is offline
Legend
Join Date: Jan 2008
Location: Indiana
Posts: 8,321
Likes: 0
Received 11 Likes on 9 Posts
Default

Timing is set by the computer.
 
  #5  
Old 02-09-2011, 04:55 PM
Annihilator_X9's Avatar
Annihilator_X9
Annihilator_X9 is offline
Captain
Join Date: Jul 2010
Location: Grand Rapids, MI
Posts: 609
Likes: 0
Received 1 Like on 1 Post
Default

Have you checked the Plenum? Fuel Pressure?
 
  #6  
Old 02-09-2011, 08:19 PM
suburban99's Avatar
suburban99
suburban99 is offline
Registered User
Thread Starter
Join Date: Jul 2010
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

Plenum gaskets replaced, intake manifold gaskets replaced. throttle body cleaned.
Never drove truck much until now as he has just got a learners license. Got a new cap, rotor, and wires coming. Idles nice, runs like crap under load. We rebuilt the 45rh as it was pooched when we bought it. #8 plug very fouled...I wonder if it has a bad valve...may need to do a compressor test. Has no error codes in computer.
 
  #7  
Old 02-09-2011, 08:28 PM
PurplDodge's Avatar
PurplDodge
PurplDodge is offline
Legend
Join Date: Jan 2008
Location: Indiana
Posts: 8,321
Likes: 0
Received 11 Likes on 9 Posts
Default

Catalytic Converter and front O2 sensor.
 
  #8  
Old 02-15-2011, 08:55 PM
suburban99's Avatar
suburban99
suburban99 is offline
Registered User
Thread Starter
Join Date: Jul 2010
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

Gutted cat and new o2 sensor. Also new plugs, wires, and cap.
What is the sensor that is near the distributor screwed into the transmission right at the top, it appears to be broken...crankshaft position sensor?
 
  #9  
Old 02-15-2011, 09:08 PM
zman17's Avatar
zman17
zman17 is offline
Retired Moderator - RIP
Join Date: May 2008
Location: NH
Posts: 18,729
Likes: 0
Received 16 Likes on 15 Posts
Default

Oil pressure sending unit.
 
  #10  
Old 02-15-2011, 09:13 PM
polish pete's Avatar
polish pete
polish pete is offline
Registered User
Join Date: Feb 2011
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by PurplDodge
Timing is set by the computer.
wrong, truck still has a distributor not coil over plug ignition, if you want you can loosen the dizzy and rotate it advance or retard, but be careful you should really have a timing light. do your tune up make sure your 02 sensors are functioning correctly and check for a plenum leak.
 

Thread Tools
Search this Thread
Quick Reply: 95 dodge ram 5.2L how to set the timing?



All times are GMT -4. The time now is 02:57 AM.