***help needed***
#1
***help needed***
I am desperate need of advice...I cross the Canadian border to work everyday from the US and my Nexus (commuter card) for crossing has fallen in behind the pull out cup holder of my van which I will now need to remove to retrieve the card. I have a 2011 Dodge Grand Caravan Mainstreet and am in a bind as I will need my ID by two when I am crossing to go home...
CAN ANYONE HELP ME???
Thank you in advance!
CAN ANYONE HELP ME???
Thank you in advance!
#2
The following users liked this post:
iubongda123 (09-09-2019)
#3
Stiill Need Help!
Okay, thank you for the info...it worked on getting the middle console out of the van...but... I think I gave wrong information. The van I have has six cup holders up front, four the the middle console between the captain chairs and two that pull out (like a drawer) from underneath the radio on the dash...
So does anyone know how to remove the cup holders that pull out from underneath the radio..?? I cannot find those in the manual...
So does anyone know how to remove the cup holders that pull out from underneath the radio..?? I cannot find those in the manual...
#4
theres a little tab on the underside that keeps the tray from pulling all the way out.
look underneaath and you should see it, if not you should be able to "feel"it with your finger tips when the tray is fully extended out
push this little tab and pull it right out, thats it
is this what the cupholder your talking about looks like?
http://file.kelleybluebookimages.com...66_320x240.jpg
look underneaath and you should see it, if not you should be able to "feel"it with your finger tips when the tray is fully extended out
push this little tab and pull it right out, thats it
is this what the cupholder your talking about looks like?
http://file.kelleybluebookimages.com...66_320x240.jpg
Last edited by hemi4spd; 07-18-2011 at 02:23 PM.
The following users liked this post:
iubongda123 (09-09-2019)
#5
The following users liked this post:
iubongda123 (09-09-2019)
#7
Join Date: Apr 2007
Location: Near Sacramento,ca
Posts: 11,545
Likes: 0
Received 92 Likes
on
78 Posts
Instrument Panel/CUPHOLDER, Instrument Panel/Removal
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the fastener from the front of the floor console.
3. Pull the floor console forward to disengage the retaining tab from the floor bracket.
4. Remove the front floor console.
5. Remove the four plastic retainers that secure the instrument panel bin to the instrument panel.
6. Disconnect and remove the instrument panel bin cover .
7. Open the cupholder to the fully open position.
8. Remove the screw located under the cupholder.
9. Remove the the two screws located on the top edge of the cupholder.
10. Remove the cupholder for the instrument panel by pulling straight out.
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the fastener from the front of the floor console.
3. Pull the floor console forward to disengage the retaining tab from the floor bracket.
4. Remove the front floor console.
5. Remove the four plastic retainers that secure the instrument panel bin to the instrument panel.
6. Disconnect and remove the instrument panel bin cover .
7. Open the cupholder to the fully open position.
8. Remove the screw located under the cupholder.
9. Remove the the two screws located on the top edge of the cupholder.
10. Remove the cupholder for the instrument panel by pulling straight out.
Trending Topics
#8
Did you figure out how to remove the cup holder? I have the same problem in my 2010 Dodge Grand Caravan. A card slipped into the crack above the cup holder but below the radio and is now trapped in there somewhere. I need to get the cup holder out so I can retrieve it. Thanks for any help you can give.
#9
#10