2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

output speed sensor malfunction 96 dodge

  #1  
Old 07-31-2011, 06:13 PM
jbuse's Avatar
jbuse
jbuse is offline
Registered User
Thread Starter
Join Date: Jul 2011
Location: Buckley
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Red face output speed sensor malfunction 96 dodge

I have a 96 dodge ram 2500 5.9L gas, my output speed sensor keeps going out. I have had it in the shop twice and they replaced the sensor each time. The first time they did a full tranny service, the only code it was throwing was the P0720. The tranny was clean so he replaced the sensor, two days later my truck had the same symptoms. Took it back got same code replaced it again. Now two months later, same symptoms. Speedometer jumping, bogs down and jumps gears. Took it to auto parts shop and had code read, and it was again P0720. Bought a new sensor replaced myself yesterday cleared code ran fine. Then today, same symptoms. Any suggestions as to what is causing it to malfunction??? Thank you.
 
  #2  
Old 07-31-2011, 06:59 PM
1969CoronetR/T's Avatar
1969CoronetR/T
1969CoronetR/T is offline
vaffanculo
Dodge Forum Moderator
Join Date: Oct 2008
Location: Pittsburgh, PA
Posts: 7,957
Likes: 0
Received 5 Likes on 3 Posts
Default

Welcome to the site. I will move this thread to the second generation Ram section,
FF
 
  #3  
Old 07-31-2011, 07:52 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,640
Likes: 0
Received 3,166 Likes on 2,920 Posts
Default

Might be a bad connection there, or, the sensor may be loose in the hole, so it rotates away from the drive gear.....
 
  #4  
Old 07-31-2011, 08:48 PM
jbuse's Avatar
jbuse
jbuse is offline
Registered User
Thread Starter
Join Date: Jul 2011
Location: Buckley
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

I replaced the VSS just now and the problem seems to be fixed, I have also ordered an abs sensor and am goimg to replace that as well, as my brake light and ABS lights are mostly always on. So after replacing the OSS 4 times, becuase the code it threw was P0720 and the VSS once we'll see.

Thanks Josh
 


Thread Tools
Search this Thread
Quick Reply: output speed sensor malfunction 96 dodge



All times are GMT -4. The time now is 07:32 PM.