1995 Dakota Transmission help
#1
1995 Dakota Transmission help
I have a '95 Dakota with the 318 (Mag V8) which has a 46 RH tranmission in it. I need to replace my transmission. I would like to know:
A) What vehicles I can get a 46RH from that will bolt to my truck.
B) Where to get a transmission case for around $150 - $200.
Or
C) Where to get a cheap used 46RH for my truck.
Unfortunatly I'm a college student and money is tight, so spending ~ $1000 will not work for me.
A) What vehicles I can get a 46RH from that will bolt to my truck.
B) Where to get a transmission case for around $150 - $200.
Or
C) Where to get a cheap used 46RH for my truck.
Unfortunatly I'm a college student and money is tight, so spending ~ $1000 will not work for me.
#3
Join Date: Feb 2009
Location: Winnipeg, Manitoba, Canada
Posts: 841
Likes: 0
Received 1 Like
on
1 Post
I have a '95 Dakota with the 318 (Mag V8) which has a 46 RH tranmission in it. I need to replace my transmission. I would like to know:
A) What vehicles I can get a 46RH from that will bolt to my truck.
B) Where to get a transmission case for around $150 - $200.
Or
C) Where to get a cheap used 46RH for my truck.
Unfortunatly I'm a college student and money is tight, so spending ~ $1000 will not work for me.
A) What vehicles I can get a 46RH from that will bolt to my truck.
B) Where to get a transmission case for around $150 - $200.
Or
C) Where to get a cheap used 46RH for my truck.
Unfortunatly I'm a college student and money is tight, so spending ~ $1000 will not work for me.
B + C) your best bet for either of these would be to hit up your local junkyard and see what you can find. It will likely need a rebuild if you get one from the junkyard tho
#6
A) 1992 - 1995 Dodge Dakota 318, ???? - 1995 Dodge Ram 318 are 2 that I know of. I'm sure you could grab one from an OBDI Dodge Ram Van 318 too. As long as its OBDI, and from anything with a 318 or 360, you should be fine.
B + C) your best bet for either of these would be to hit up your local junkyard and see what you can find. It will likely need a rebuild if you get one from the junkyard tho
B + C) your best bet for either of these would be to hit up your local junkyard and see what you can find. It will likely need a rebuild if you get one from the junkyard tho
Well, the problem is that my tranmission overheated and the planetary basicly disinigrated. Well after that the pieces of aluminum gouged out the the core. Most of my hard parts are still usable but the core is not.