Oil pressure sender location.
#1
Oil pressure sender location.
O.K. so here it goes and I feel like an idiot. Last year changed out sender on 3.9 no problem. This year leaking oin down on bell housing same problem my mind told me. Picked up new sender annd started to do the job, daaaa, errrrrrrrr where is the sender? O.K. there is the EGR valve, and there is the Dist and where is the sender is it down in the vallet if the intake? Any one have a pic, Sure feel like an idiot on this one! THanks for any help guys. As far as , when we moved Mrs N. Packed it, its been harder to in findd than the sender...
#4
Anybody got a pic???
This is weird. Im old but not blind, or maby I am.Yep thats where it is supposed to be. Guess what it aint! I have the EGR valve, all its plumbing and piping,then the Distributor. Checked for it in daylight went and bought an inspection mirror looked with lights last night, degunked the area, guess i will have to remove dist cap and wires and look very closely to see if it is broken off, but since I have pressure I dont think that is the case. Also the guy at autozone could find no tech pictures for the magnum.
Last edited by 89newbie; 01-10-2012 at 09:02 AM. Reason: clairify something
#6
THanks guys so it must be smack dab up against the EGR across from the dist. Ill go pull the cap and wires, guess thats what happens when your running on the 66 year old side and dont wear cheaters. Oh well cleaned it all up hanging over the fender just had started the truck and the idle was up and down and i heard noise in the idle air motor that sounded like BB'S in there. ROFL I know old guys are supposed to drive new cars been there done that but for some reason I really like this old Dak! I have other plans for it but dont want to sound like im 16 so ill keep em to me until or till they drive the nails in the coffin
Last edited by 89newbie; 01-10-2012 at 07:26 PM. Reason: add to content.
#7
Trending Topics
#9
#10