Seatbelt Alarm Disable?
#1
#2
why? if your seatbelt is unbuckled at the time of impact your insurance company may sue you if you get hurt. i also read somewhere that certain airbags will not deploy if belt is unbuckled. i was like you for years with not wearing the belt. the mfr's have now beatin me down to wear i do it out of habit and feel naked without it. once you do it for a week or so (to shut the beeping off) it won't bother you. PLUS it keeps you safe lol
#3
Try this
Disable BeltAlert (Seat Belt Chimes):
NOTE: The following steps must occur within the first
60 seconds of the ignition switch being turned to the ON
or START position. DaimlerChrysler does not recommend
deactivating Beltalert.
1. Turn the ignition switch to the LOCK position and
buckle the driver’s seat belt.
2. Turn the ignition switch to the ON position and wait
for the Seat Belt Warning Light to turn off.
3. Within 60 seconds of turning the ignition switch to the
ON position, unbuckle and then re-buckle the driver’s
seat belt at least three times within 10 seconds, ending
with the seat belt buckled.
NOTE: Watch for the Seat Belt Warning Light to turn on
while unbuckling and off while re-buckling the seat belt.
It may be necessary to retract the seat belt partially each
time when unbuckling.
4. Turn the ignition switch to the LOCK position. A
single chime will sound to signify that you have successfully
completed the programming.
NOTE: The following steps must occur within the first
60 seconds of the ignition switch being turned to the ON
or START position. DaimlerChrysler does not recommend
deactivating Beltalert.
1. Turn the ignition switch to the LOCK position and
buckle the driver’s seat belt.
2. Turn the ignition switch to the ON position and wait
for the Seat Belt Warning Light to turn off.
3. Within 60 seconds of turning the ignition switch to the
ON position, unbuckle and then re-buckle the driver’s
seat belt at least three times within 10 seconds, ending
with the seat belt buckled.
NOTE: Watch for the Seat Belt Warning Light to turn on
while unbuckling and off while re-buckling the seat belt.
It may be necessary to retract the seat belt partially each
time when unbuckling.
4. Turn the ignition switch to the LOCK position. A
single chime will sound to signify that you have successfully
completed the programming.
#4
why? if your seatbelt is unbuckled at the time of impact your insurance company may sue you if you get hurt. i also read somewhere that certain airbags will not deploy if belt is unbuckled. i was like you for years with not wearing the belt. the mfr's have now beatin me down to wear i do it out of habit and feel naked without it. once you do it for a week or so (to shut the beeping off) it won't bother you. PLUS it keeps you safe lol
#5
#6
You could try a product like this one. Super easy and effective:
http://www.turnoffseatbeltalarm.com/
http://www.turnoffseatbeltalarm.com/
#7
Trending Topics
#8
I turned off my chime in my Megacab. We always took my truck to the ranch, and we don't use seatbelts on the ranch. It's really unnecessary and a hindrance. The procedure in Post #3 is how you do it on the truck....I don't know how to do it with the push-button start....
#9
#10