Window Lock Switch
#1
Window Lock Switch
The driver switch can roll down all windows, but I can't roll the windows from the switches from the other three windows. At first I was going to take the panel off the door to look at the switch and noticed it caused all the switches to work just by moving it. It would work for a time and I then I would have to move the panel again to get it to work. Now It will not work. Do I need a whole new panel or should I look at some wires. I'm not sure where to look or what to test for. Any ideas would be helpful.
Thanks!
Thanks!
#2
#3
#4
Is there anyway to bypass that switch? I called Dodge today and they said it's $160 bucks because you have to buy the whole assembly with all the switches on it.
#5
#7
I do have a meter Dan, but I won't need it. I was attempting to unplug the harness from the piece that has the switches on it. I noticed it was cocked in there and it was hard to take off. I was able to push on the harness and it snapped back in place. The windows then worked! Thanks for everyone that gave advise!
Trending Topics
#8
I do have a meter Dan, but I won't need it. I was attempting to unplug the harness from the piece that has the switches on it. I noticed it was cocked in there and it was hard to take off. I was able to push on the harness and it snapped back in place. The windows then worked! Thanks for everyone that gave advise!
#9
#10
https://dodgeforum.com/forum/2439583-post8.html
I had the same issue on my 2001 Durango. The procedure is the same for bypassing the lockout switch.
I had the same issue on my 2001 Durango. The procedure is the same for bypassing the lockout switch.