2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

need more horse power

Thread Tools
 
Search this Thread
 
  #1  
Old 08-31-2014, 01:25 AM
Graziano303's Avatar
Graziano303
Graziano303 is offline
Registered User
Thread Starter
Join Date: Aug 2014
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default need more horse power

Alight, I have a nice 97 Dodge Dakota 5.2 liter. I already did a cold air intake have exhaust headers on order and I already have a magnaflow exhaust. is there anything I can do without tearing into the motor too much to gain more horsepower.. Or should I get a programmer for it? basically aside from a supercharger or turbo kit is there anything else I can do to put this motor its full potential?
 
  #2  
Old 08-31-2014, 02:14 PM
MoparMan1991's Avatar
MoparMan1991
MoparMan1991 is offline
Record Breaker
Join Date: Dec 2010
Location: Barksdale AFB, LA
Posts: 2,213
Likes: 0
Received 1 Like on 1 Post
Default

You could swap in a HEMI, or just upgrade to a newer Ram or Dak.
 
  #3  
Old 08-31-2014, 03:32 PM
Graziano303's Avatar
Graziano303
Graziano303 is offline
Registered User
Thread Starter
Join Date: Aug 2014
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by MoparMan1991
You could swap in a HEMI, or just upgrade to a newer Ram or Dak.
I'm reallyjust curious if there's something that I can can tinker with that will give me a few extra hp
 
  #4  
Old 08-31-2014, 06:44 PM
jondakotaguy's Avatar
jondakotaguy
jondakotaguy is offline
Record Breaker
Join Date: Jan 2011
Location: Texas
Posts: 1,850
Likes: 0
Received 10 Likes on 9 Posts
Default

Programmer might give you a better ECM config than factory and better performance but really if your wanting more power your going to have to do some engine work.
 
  #5  
Old 08-31-2014, 07:35 PM
LIZZRD's Avatar
LIZZRD
LIZZRD is offline
Veteran
Join Date: Jan 2014
Location: N. Carolina
Posts: 267
Received 6 Likes on 6 Posts
Default

not sure why using the roller rockers 1.7 ratio not jumped on more often. You would also want a larger throttle body (52mm +) and should do the plenum plate fix at this time. Some modify, cut up the inside of their ' turtle ' intake here also.
Being 4x4 and if your wanting low end torque consider dual ( since you have headers ) 2.75" into a single 3" exhaust.
Then i would recommend a tune, about where i am at...
 

Last edited by LIZZRD; 09-01-2014 at 05:55 PM.
  #6  
Old 09-06-2014, 01:11 PM
TheNewbie's Avatar
TheNewbie
TheNewbie is offline
Professional
Join Date: Feb 2012
Location: Grand Junction, CO
Posts: 210
Likes: 0
Received 0 Likes on 0 Posts
Default

What do you have for axle gearing? I would bet that a gear swap might give you what you're looking for?

What do you use your truck for? In town or highway? Do you tow? What size tires are you running? 4x4 or 2 wheel drive?
 
  #7  
Old 09-06-2014, 02:19 PM
magnethead's Avatar
magnethead
magnethead is offline
Legend
Join Date: Feb 2005
Location: Fort Worth, TX
Posts: 7,923
Received 152 Likes on 139 Posts
Default

definitely a +1 on the 1.7 RR's from John Mercedes/Harland Sharp and an SCT from Hemifever. Both together picked me up significantly on the 1/8 mile. After that I took off the clutch fan and went to 4.10 gears.
 
  #8  
Old 09-08-2014, 04:24 PM
MadisonDakota's Avatar
MadisonDakota
MadisonDakota is offline
All Star
Join Date: Sep 2008
Posts: 829
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by MoparMan1991
You could swap in a HEMI, or just upgrade to a newer Ram or Dak.
What a ridiculous, unhelpful, and downright idiotic suggestion.
 
  #9  
Old 09-08-2014, 06:09 PM
MoparMan1991's Avatar
MoparMan1991
MoparMan1991 is offline
Record Breaker
Join Date: Dec 2010
Location: Barksdale AFB, LA
Posts: 2,213
Likes: 0
Received 1 Like on 1 Post
Cool

Originally Posted by MadisonDakota
What a ridiculous, unhelpful, and downright idiotic suggestion.
Deal with it.
 
  #10  
Old 09-08-2014, 10:42 PM
dodgeramguy85's Avatar
dodgeramguy85
dodgeramguy85 is offline
Grand Champion
Join Date: Mar 2008
Location: Houtzdale,PA
Posts: 5,508
Likes: 0
Received 6 Likes on 6 Posts
Default

2 best options to help out with power with what you have now is gonna be a throttle body and programmer. I had a SCT tuned by hemifeaver on my 5.2 and it was awesome! Def noticeable gains. Even going from 4,800 wot shift to 5,200 was a big improvement. Gear swap will help but imo the money you spend on that gains you very little for a dd. Id rather take that money and put it into the engine and trans.
 


Quick Reply: need more horse power



All times are GMT -4. The time now is 11:20 PM.