2nd Gen Durango 2004 - 2009

P0700 and P0750 on '06 4.7L with 545RFE

  #11  
Old 05-09-2016, 08:22 AM
Dodgerookie4's Avatar
Dodgerookie4
Dodgerookie4 is offline
Registered User
Join Date: Dec 2015
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Matthew Guilbault
I'm having the same issue and just ordered input and output speed sensors and a governor pressure sensor. I'm reading about solenoid pack replacements and accumulator problems necessitating the installation of a shift pack with a thicker accumulator plate. Haven't dropped the throttle body yet, but I'm hoping to work my way through this with the P0700 codes for improper third and fourth gears. Seems like a lot of people have had and fixed this issue and it's been one of the above? Any thoughts?
After spending a small fortune and replacing every sensor and up to and including two transmissions, I finally ordered a new computer and it fixed it. I ordered from auto computer exchange and they took care of it. The tcm was my problem but the ecm is all one computer on mine so I had to replace the main. Good luck
 
  #12  
Old 05-10-2016, 04:27 PM
Matthew Guilbault's Avatar
Matthew Guilbault
Matthew Guilbault is offline
Registered User
Join Date: May 2012
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

Thank you! I was afraid you'd say that. I suspect the computer is almost the cost of what the truck is currently worth?!


The site you gave me lists a separate TCM from the ECM for a 2003 Durango...







2003 Dodge Durango

4.7L V8 Gas
TCM - Transmission Control Module
$159.00
https://www.autocomputerexchange.com...Bto%5D=&search=
 


Thread Tools
Search this Thread
Quick Reply: P0700 and P0750 on '06 4.7L with 545RFE



All times are GMT -4. The time now is 09:32 PM.