2nd Gen Intrepid 1998 through 2004 Intrepids

P0344 and P0340 Codes

  #21  
Old 11-05-2010, 10:15 PM
tomas1958's Avatar
tomas1958
tomas1958 is offline
Registered User
Join Date: Nov 2010
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default

please i need help i have 2004 dodge intrepid 3.5 motor,it have a lot problem for star 3or4 times when is done ,in parking doesnot pass of 2500 rpm,the code obll is p0016 and p0344,i replaced ,camsensor cranktsensor,computer,iac valve,and nothing,the mechanic,checked the time possition,and is ok,some body can helpme please
 
  #22  
Old 12-16-2010, 05:37 PM
ckappenman's Avatar
ckappenman
ckappenman is offline
Registered User
Join Date: Dec 2010
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default p0340 code problem

Could I also get a copy of the factory diag sheet. Thx
 
  #23  
Old 12-16-2010, 05:38 PM
ckappenman's Avatar
ckappenman
ckappenman is offline
Registered User
Join Date: Dec 2010
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

I was hoping to also get a copy of the factory diag sheet. Thx
 
  #24  
Old 12-19-2010, 08:39 AM
lswiger's Avatar
lswiger
lswiger is offline
Registered User
Join Date: Dec 2010
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default OBD code 340 344

I have a 2004 Intrepid with a 3.5 and I believe I have the same problem. I was told to turn the key on and of three times and then leave it on and a blink code would be presented by the check engine lite, but to my suprise the odometer showed three codes in order, P0016-P0340-P0344 are these the OBD II codes I should be doing something about? I dont have a seperate code reader and was wondering how serious this is since the car runs fine with the lite on.
 
  #25  
Old 12-19-2010, 08:43 AM
lswiger's Avatar
lswiger
lswiger is offline
Registered User
Join Date: Dec 2010
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

I too believe I have this problem, I was told to turn the key on and off three times to get the blink code but to my suprise they show in the odometer-
P0016,P0340,P0344
are these the OBDII codes or some other thing? should I be concerned since the car runs fine?
 

Last edited by lswiger; 12-19-2010 at 08:45 AM. Reason: add code 16
  #26  
Old 03-20-2011, 01:02 AM
buddwisemonk's Avatar
buddwisemonk
buddwisemonk is offline
Registered User
Join Date: Mar 2011
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default 0344 and jerking after 2400 rpms

I had similiar problems and after replacing the CPM and it wasn't fixed. I checked my spark plug wires...one was badly cracked (half way up the sleeve). After replacing that, the car runs great.

I hope this helps.
 
  #27  
Old 04-07-2011, 02:46 PM
buddwisemonk's Avatar
buddwisemonk
buddwisemonk is offline
Registered User
Join Date: Mar 2011
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default 0344 and 0340

after replacing the head b/c the spark plug stripped out. I am now again having the problem of 0344 and 0340.
2005 dodge neon 2.0 L head off of a 1996 dodge neon 2.0 L
Both the Dealership and Auto-part stores assured me the head is the same.

After checking timing to be sure it was correct I am having the error codes again and the car is in "limp" mode.

Replaced the PCM and no change. I have tried 3 total with no solution yet.
Wiring looks good and the PCM for the 96 and 05 neons are the same per auto-parts stores......

ANY IDEAS?
 
  #28  
Old 03-04-2014, 06:12 PM
jjaypops's Avatar
jjaypops
jjaypops is offline
Registered User
Join Date: Mar 2014
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by buddwisemonk
after replacing the head b/c the spark plug stripped out. I am now again having the problem of 0344 and 0340.
2005 dodge neon 2.0 L head off of a 1996 dodge neon 2.0 L
Both the Dealership and Auto-part stores assured me the head is the same.

After checking timing to be sure it was correct I am having the error codes again and the car is in "limp" mode.

Replaced the PCM and no change. I have tried 3 total with no solution yet.
Wiring looks good and the PCM for the 96 and 05 neons are the same per auto-parts stores......

ANY IDEAS?
I know this is an old post but I am having the exact same problem if anyone can help it is greatly appreciated thank you. I have a Chrysler Concorde 2003 with the 3.5 engine Thanks
 
  #29  
Old 07-27-2014, 05:49 PM
lugnot's Avatar
lugnot
lugnot is offline
Registered User
Join Date: Jul 2014
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default po344 &po340 codes

had po344 code replaced camshaft sensor , problem dissapeared. code reader read yellow for about 25 miles. with a few sensor readings bouncing, o2, cat and one dont rember. possiable that a po340 is for the crankshaft position sensor.
or wiring in between my lucky guess? figured a lot of heat up front by the fan.
code reader suggested interment readings. maybe code 344 & 340 indicate a problem between two systems, my vieh only 65k.

cheap relief about 38 bucks, destressing now
 
  #30  
Old 07-27-2014, 05:51 PM
lugnot's Avatar
lugnot
lugnot is offline
Registered User
Join Date: Jul 2014
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default po344 & po344

forgot i have a 2003 intrepid 2.7
 

Thread Tools
Search this Thread
Quick Reply: P0344 and P0340 Codes



All times are GMT -4. The time now is 02:01 AM.