snowboundrmk's 360 build
#103
Will this oil pump priming shaft work? It's not listed for the magnum engines, but i don't see why it wont work since the older engines use the same oil pump.
http://www.summitracing.com/parts/dc...ge?prefilter=1
http://www.summitracing.com/parts/dc...ge?prefilter=1
I bought one for my engine but can't find the link to it anymore. I'll get you the Mopar part number tomorrow.
#105
I am trying to decide if I should get the cold air intake or not. I know they do nothing for our trucks, and the only reason I am considering it is because my stock air box is broken(plastic tabs on back). I took the broken one off today and I think I might be able to make some new tabs for it out of metal. I think it will work if I cut it so it can slide done the slot(picture 3) and then bend at a 90 degree angle over where the plastic tabs are suppose to be. Think it will work?
Last edited by snowboundrmk; 03-17-2014 at 07:01 PM.
#106
Got this laying in the tool box............I don't use it. K.
It came off this 97 magnum 5.9, Spectra filter/pipe, relatively clean reusable filter, and black gizmo with clamp (yours if you want it).
I'll send it for nothing. PM with interest. K................ Need street address for FedEx
OOPS, gotta shrink those photos
It came off this 97 magnum 5.9, Spectra filter/pipe, relatively clean reusable filter, and black gizmo with clamp (yours if you want it).
I'll send it for nothing. PM with interest. K................ Need street address for FedEx
OOPS, gotta shrink those photos
Last edited by tincan57; 03-17-2014 at 11:02 PM. Reason: 97 Magnum 5.9 Spectra CAI for OP/St. address
#107
Snowbound,
It is the same part number as the one you have listed from Summit.
P4286800 so I would say go for it. I won't be using mine for a few more months. How long before you are ready to try starting your new engine? If I end up starting mine first I will let you know if the primer rod works or not.
#108
Got this laying in the tool box............I don't use it. K.
It came off this 97 magnum 5.9, Spectra filter/pipe, relatively clean reusable filter, and black gizmo with clamp (yours if you want it).
I'll send it for nothing. PM with interest. K................ Need street address for FedEx
OOPS, gotta shrink those photos
It came off this 97 magnum 5.9, Spectra filter/pipe, relatively clean reusable filter, and black gizmo with clamp (yours if you want it).
I'll send it for nothing. PM with interest. K................ Need street address for FedEx
OOPS, gotta shrink those photos
LOL
#109
Wildman, I hope to have it running in the next couple months too. I'm still saving my money for more parts and it has just start getting into the 40s so I haven't been able to do any work. I'm going to give it a try. I know merc would know but he hasn't been on the forum in a while so I will ask him when he gets back on.
Ham Bone, tincan is sending me that and I'm going to use it. I think it's a good start to build off of when I have more money. I was thinking of using a longer straight pipe and than a 90 degree turn to get it more by the headlight.
Ham Bone, tincan is sending me that and I'm going to use it. I think it's a good start to build off of when I have more money. I was thinking of using a longer straight pipe and than a 90 degree turn to get it more by the headlight.
#110