I removed my factory emblems, but the sticky adhesive is still not coming off well. Are there any good techniques to remove this?

 

GooGone? WD40? MEK?

 

They sell something I've seen here at Advance, but I can't remember the name. It's made specifically for removing emblem adhesive, and they stock it right next to the waxes and polishes.

 

WD40 works fine for the sticky stuff.

 

i was having luck with googone extreme, i think its googone, but im positive its extreme.....

this is what the pros use
http://cgi.ebay.com/ebaymotors/TOOL-...spagenameZWDVW

 

yea i used the googone ext. just make sure u dnt let it stay on ur paint to long or u will be in big trouble lol

 

WD 40 worked well for me.

 

Thanks y'all, I got the emblems off. But now the 2 small stripes that runs from the front to the back is hard to get off. I got the stripes off, but the adhesive isnt coming off with WD40 and hard scrubbing... dammit

 

use a heat blower as well to melt it a little. if i took mine of and used the PB Blaster brand adhesive remover with a heat gun and it all came off. It will require some elbow grease. I replaced mine with the newer Chrome ones that come on the 3rd Gen trucks

 

be sure to wax that area after you're all done...the googone removes all of the protection of wax.