2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Remote start

Thread Tools
 
Search this Thread
 
  #1  
Old 08-30-2009, 10:36 AM
tomcat_m's Avatar
tomcat_m
tomcat_m is offline
Rookie
Thread Starter
Join Date: Jul 2008
Location: Stoney Creek Canada
Posts: 79
Likes: 0
Received 0 Likes on 0 Posts
Default Remote start

I want to install a remote start.... the truck is a 98 Ram 4x4 with no power anything like windows or doors etc
I just want to remote start it
The kit says the module wires on remote start says yellow goes to ignition, red wire goes to 12v(battery), orange goes to accessories( dont care) purple goes to the starter the green wire goes to the 5th relay and the red wire goes to 12v battery it has a fuse on that wire

If anyone knows the wiring schematic on a 98 ram where theses wires goes
I would love to get help..... it doesnt seem that hard
Thanks
Mike
 
  #2  
Old 08-30-2009, 11:13 AM
TruckinDodge's Avatar
TruckinDodge
TruckinDodge is offline
Professional
Join Date: Jan 2008
Location: Billings MT
Posts: 155
Likes: 0
Received 0 Likes on 0 Posts
Default

Try this http://www.the12volt.com/ You will want to wire every thing you can including ACC the unit goes there before starting the engine on my unit.
 
  #3  
Old 08-30-2009, 03:22 PM
speeddemon31176's Avatar
speeddemon31176
speeddemon31176 is offline
All Star
Join Date: May 2009
Location: Carbondale,PA
Posts: 754
Likes: 0
Received 0 Likes on 0 Posts
Default

^+1 on the above mentioned website. They have never steered me wrong.
 
  #4  
Old 08-30-2009, 03:55 PM
tomcat_m's Avatar
tomcat_m
tomcat_m is offline
Rookie
Thread Starter
Join Date: Jul 2008
Location: Stoney Creek Canada
Posts: 79
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for the infor but it only tells me hook it up to the Ignition Switch Harness which I know.... I need to know the colors wires it goes to?
Mike

Ok never mind i read it again
Thanks again
 

Last edited by tomcat_m; 08-30-2009 at 04:57 PM. Reason: Can't read



Quick Reply: Remote start



All times are GMT -4. The time now is 12:54 AM.