How to tell what class your hitch is?
05-22-2010, 10:39 PM
Record Breaker
Thread Starter
Join Date: Mar 2009
Location: WV
Posts: 1,430
How to tell what class your hitch is?
Does anyone know how to tell what class the hitch on my truck is? It does not have a sticker like most so I cant tell. I am going to buy a 5000LB camper and neet to know if my hitch is rated for that kind of weight.
05-22-2010, 10:47 PM
Join Date: Mar 2010
Location: North Georgia
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
i believe there are 3 classes, could be wrong and probably am(i will get corrected). class A,B,C. i think A is light duty(under3,000 lbs), Class B under 6000 lbs. and C under 10,001 Lbs. there are a couple of sizes as far as receivers go. dont know what weight they do. maybe someone will chime in.
05-22-2010, 11:30 PM
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,651
Likes: 0
There SHOULD be a label, either stamped steel, riveted to the hitch or, numbers stamped right into the crossbar of the hitch. It will have a great deal of useful information for ya.
05-22-2010, 11:31 PM
Join Date: Sep 2009
Location: New Mexico
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
Im pretty sure all 2" receiver style hitches will be at least a class III/IV. Not sure the weight that class can carry tho.
05-22-2010, 11:39 PM
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,651
Likes: 0
Class III is: WC GTW - Up to 5,000 lbs. (max weight)
WC TW - Up to 500 lbs (tongue weight)
05-23-2010, 05:00 PM
Record Breaker
Thread Starter
Join Date: Mar 2009
Location: WV
Posts: 1,430
I do have a 2x2 inch recever. I got under my truck today and there was no tags, sickers, or ingravings. Any more ideas.
05-23-2010, 07:00 PM
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,651
Likes: 0
Do you know if it was factory installed?
Aside from that, I haven't a clue. Might be better off just going and purchasing something that you KNOW will work, rather than taking a chance of having to wonder whose trailer that is passing you, only to realize it is yours........
05-23-2010, 07:10 PM
Join Date: Nov 2008
Location: Malvern Pa - Canadensis Pa
Posts: 7,950
Likes: 0
05-23-2010, 08:07 PM
Join Date: Apr 2010
Location: Meeker, CO
Posts: 5,011
Likes: 0
If it's a 2" receiver, it's a III or IV. Class V has a 2.5" receiver. On a half-ton truck you're limited to Class III loads anyway because the suspension cannot handle Class IV loads.
05-23-2010, 08:59 PM
Record Breaker
Thread Starter
Join Date: Mar 2009
Location: WV
Posts: 1,430
well I will never pull the camper with out a weight distributing hitch and sway bars so I should be ok right.
Could someone post a pic of the hitch on there 1/2 ton?
Last edited by BigRedRam95; 05-23-2010 at 09:04 PM.