2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Rear Suspension

Thread Tools
 
Search this Thread
 
  #1  
Old 06-21-2010, 09:00 AM
TSuppa's Avatar
TSuppa
TSuppa is offline
Registered User
Thread Starter
Join Date: Jun 2010
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default Rear Suspension

I am a new owner of a Dodge pickup, so what I am experiencing may be normal, but I thought I better ask. I have noticed when driving on gravel roads the rear end tries to get away from me. I was driving about 35-40 mph and went over a slightly washboard section and the rear end really got squirrely. It seems to me this may be due to the fact that the truck is sprung pretty stiff. If so, is there a good safe way to soften the ride. I tow infrequently, and when I do tow it is less than 3500lbs.

I was told this truck has the factory tow package, am not sure what that consists of (heavier springs?).

Thanks

2001 Ram 1500 SLT 4x4 Laramie, 5.9
 
  #2  
Old 06-21-2010, 11:40 AM
Augiedoggy's Avatar
Augiedoggy
Augiedoggy is offline
Champion
Join Date: Aug 2009
Location: Western NY,
Posts: 3,014
Received 8 Likes on 7 Posts
Default

Originally Posted by TSuppa
I am a new owner of a Dodge pickup, so what I am experiencing may be normal, but I thought I better ask. I have noticed when driving on gravel roads the rear end tries to get away from me. I was driving about 35-40 mph and went over a slightly washboard section and the rear end really got squirrely. It seems to me this may be due to the fact that the truck is sprung pretty stiff. If so, is there a good safe way to soften the ride. I tow infrequently, and when I do tow it is less than 3500lbs.

I was told this truck has the factory tow package, am not sure what that consists of (heavier springs?).

Thanks

2001 Ram 1500 SLT 4x4 Laramie, 5.9
I have the same issue on my 96 1500...railroad tracks can be scary at an angle.... I believe its normal and due to stiff suspension but in my case worn shocks might not be helping..
 
  #3  
Old 06-21-2010, 11:23 PM
redheadhunter21's Avatar
redheadhunter21
redheadhunter21 is offline
Champion
Join Date: Apr 2007
Location: Miami, Fl
Posts: 2,831
Likes: 0
Received 1 Like on 1 Post
Default

Mine does this too and you might want to look into new shocks to help this....my shocks are bad
 
  #4  
Old 06-22-2010, 02:55 AM
dakotas ram's Avatar
dakotas ram
dakotas ram is offline
Champion
Join Date: Jul 2008
Location: NW Arkansas
Posts: 3,430
Likes: 0
Received 2 Likes on 2 Posts
Default

lower it.
 
  #5  
Old 06-22-2010, 07:06 AM
1997DodgeRam's Avatar
1997DodgeRam
1997DodgeRam is offline
Professional
Join Date: Oct 2006
Location:
Posts: 224
Likes: 0
Received 1 Like on 1 Post
Default

Still got original shocks? Mine was like that when the shocks were shot, easy job to do on the back if that is all you need are new shocks.
 
  #6  
Old 06-22-2010, 07:23 AM
UnregisteredUser's Avatar
UnregisteredUser
UnregisteredUser is offline
Grand Champion
Join Date: Apr 2010
Location: Meeker, CO
Posts: 5,011
Likes: 0
Received 6 Likes on 6 Posts
Default

Unladen pickup trucks (and bobtailing semi tractors, too) get squirrely on washboard roads. Load 'em up with some weight on the rear axle and they calm right down.

Since you've got a 4x4, just stuff it into 4-Hi when you're on washboard road and the problem will clear right up because the unladen rear axle won't be pushing the heavy front of the truck. Nuthin' to it.

If it's something you'll be doing regularly, you might consider adding some weight over the rear axle. Something like this would work just fine, as would a few hundred pounds of bagged sand or three big ole fat chicks.
 
  #7  
Old 08-30-2010, 07:29 AM
Andrew123's Avatar
Andrew123
Andrew123 is offline
Registered User
Join Date: Aug 2010
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

In my friend's 2009 crew cab has fallen 1/2 inch, it is noticble even to the dealer, who says it is within specifications and only bring it back if it drops down to 3/4 of an inch. Is it a bad coil, shock or compression joint? or other?
 



Quick Reply: Rear Suspension



All times are GMT -4. The time now is 10:40 AM.