When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
well happy b-day to me, drivers hub bearing and tie rod end need replacing, just wondering, i know i have ABS but how do i know if its 2 or 4 wheel? and are there differences in the assemblys?
You don't have ABS in the front my 01 does not. If you have ABS you will see 2 lines on the back side of the hub.
Not necessarily true, he could have it.
All the second gens have rear wheel ABS, but the front is an option. The bearings are a little different, as the one with ABS has a wire going to it. If you don't have ABS either one will work, but if you do have ABS you will need one with the wire, otherwise your Brake and ABS light will be on (and the system will not function properly).
no oreilys around here. no thats brake fluid from pushing the calipers back and the ebc D/S i got for $130 and the ebc green stuff pads i got for $40 on ebay