DodgeForum.com

2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Harland Sharp 1.7 Part # S70037?

   
  #1  
Old 09-27-2010, 02:34 AM
Pacmanloads's Avatar
Pacmanloads
Pacmanloads is offline
Captain
Thread Starter
Join Date: Oct 2009
Location: Moncton , New Brunswick
Posts: 607
Likes: 0
Received 0 Likes on 0 Posts
Default Harland Sharp 1.7 Part # S70037?
Just looking around for my future Roller Rockers and was wondering if these are the ones you all are installing .

Harland Sharp S70037

Nice Performance gains?

http://www.summitracing.com/parts/CS...|DODGE|CID|318
 
Reply Like
  #2  
Old 09-27-2010, 02:49 AM
Hahns5.2's Avatar
Hahns5.2
Hahns5.2 is offline
Record Breaker
Join Date: Mar 2009
Location: Battle Ground WA
Posts: 2,181
Likes: 0
Received 2 Likes on 2 Posts
Default
Those are them. I recall they've been dynoed at a 10hp gain at the wheels and I believe it, they also make it much smoother in the higher RPMs.
 
Reply Like
  #3  
Old 09-27-2010, 02:50 AM
Pacmanloads's Avatar
Pacmanloads
Pacmanloads is offline
Captain
Thread Starter
Join Date: Oct 2009
Location: Moncton , New Brunswick
Posts: 607
Likes: 0
Received 0 Likes on 0 Posts
Default
Thanks! Did you have to replace anything else? Or just bolt those bad boys up?
 
Reply Like
  #4  
Old 09-27-2010, 03:18 AM
CBR900RR19's Avatar
CBR900RR19
CBR900RR19 is offline
Professional
Join Date: Jul 2010
Location: New York
Posts: 148
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by Pacmanloads
Thanks! Did you have to replace anything else? Or just bolt those bad boys up?
Here is the DIY courtesy of Iwhitne... I talked to him about them, going to be one of my future mods for sure!! Keep us posted how your install goes and what you think. Good Luck...

https://dodgeforum.com/forum/2nd-gen...r-rockers.html
 
Reply Like
  #5  
Old 09-27-2010, 09:35 AM
Sheriff420's Avatar
Sheriff420
Sheriff420 is offline
Grand Champion
Join Date: Apr 2008
Location: Lee County, North Carolina
Posts: 7,055
Likes: 0
Received 5 Likes on 5 Posts
Default
That had better be the right ones because that's what I put in my engine.
Someone mentioned a website that you can get them for something like 275$ so wait on them to see this thread before you buy.
 
Reply Like
  #6  
Old 09-27-2010, 09:44 AM
zman17's Avatar
zman17
zman17 is offline
Retired Moderator - RIP
Join Date: May 2008
Location: NH
Posts: 18,729
Likes: 0
Received 16 Likes on 15 Posts
Default
Southeast performance
 
Reply Like
  #7  
Old 09-27-2010, 10:07 AM
lastrights's Avatar
lastrights
lastrights is offline
Grand Champion
Join Date: Sep 2007
Location: the burgh
Posts: 5,849
Likes: 0
Received 4 Likes on 4 Posts
Default
ya, it does help the sound of a lil lope of the motor, when i had my cutout open all the time i always got asked at red light and stuff if my truck has a cam.
 
Reply Like

Trending Topics

  #8  
Old 09-27-2010, 10:57 AM
Pacmanloads's Avatar
Pacmanloads
Pacmanloads is offline
Captain
Thread Starter
Join Date: Oct 2009
Location: Moncton , New Brunswick
Posts: 607
Likes: 0
Received 0 Likes on 0 Posts
Default
Someone mentioned a website that you can get them for something like 275$ so wait on them to see this thread before you buy.
Well I'm in Canada so I am going to try and get them locally as Customs usually robs my wallet for Duty. Thanks Everyone !
 
Reply Like
  #9  
Old 09-27-2010, 11:00 AM
Pacmanloads's Avatar
Pacmanloads
Pacmanloads is offline
Captain
Thread Starter
Join Date: Oct 2009
Location: Moncton , New Brunswick
Posts: 607
Likes: 0
Received 0 Likes on 0 Posts
Default
Local Shop Here wants $446 CAD + $40 Freight.....I might be holding off on this for a while.
 
Reply Like
  #10  
Old 09-27-2010, 11:18 AM
zman17's Avatar
zman17
zman17 is offline
Retired Moderator - RIP
Join Date: May 2008
Location: NH
Posts: 18,729
Likes: 0
Received 16 Likes on 15 Posts
Default
Well, $275 +shipping+duty should be a lot less than $500.
 
Reply Like

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search
Quick Reply: Harland Sharp 1.7 Part # S70037?


Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 07:50 PM.