(3) Codes: p1495, p1294 and p0443, what exactly is the problem?
#1
01-19-2011, 01:52 PM
Join Date: Nov 2010
Location: Chicago
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
(3) Codes: p1495, p1294 and p0443, what exactly is the problem?
I know the p0443 is something to do with emmissions, but what about the other two, I do get a little weird idle and misfire when im at the red light but it goes away and has plenty of power as soon as I give it gas?? The idle will fluctuate from 700 to 800 to 900 back to 800 rpm.... etc
#2
01-19-2011, 02:55 PM
P0443 Evap Purge Solenoid Circ
P1294 Target Idle Not Reached
P1495 Leak Detection Pump Solenoid Circ
You have a vacuum leak in the vapor recovery system. Check ALL the lines running from the cannister, which on yours, should be on the passenger side, up under the bed, mounted right to the frame, to wherever they go. Also check and see if you cannister has puked its carbon into the lines.
P1294 Target Idle Not Reached
P1495 Leak Detection Pump Solenoid Circ
You have a vacuum leak in the vapor recovery system. Check ALL the lines running from the cannister, which on yours, should be on the passenger side, up under the bed, mounted right to the frame, to wherever they go. Also check and see if you cannister has puked its carbon into the lines.
#3
01-19-2011, 03:45 PM
Join Date: Nov 2010
Location: Chicago
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
#4
01-19-2011, 03:50 PM
#5
01-19-2011, 03:55 PM
Join Date: Nov 2010
Location: Chicago
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
#6
01-19-2011, 04:06 PM
