99 ram 1500 5.9 4x4 transmission problems
01-29-2011, 07:56 PM
Registered User
Thread Starter
Join Date: Jan 2011
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
99 ram 1500 5.9 4x4 transmission problems
The truck won't move. On it's last drive, the transmission had trouble "catching". In an effort to get it home I would shift into reverse and then drive again and get it to move again. Now it appears to be done moving. I have dropped the pan and saw no real debris to speak of. I tried changing the fluid and filters thinking maybe I would have some luck. I went through the process of making sure the fluid was full, checking it in neutral etc. Nothing. The truck still does not want to move. I opened the cooling line while it was running and no fluid came out. I then dropped the pan again to find that the
transmission fluid never moved through the transmission. The little fluid left in the transmission was older fluid not the new pink fluid. Any thoughts on the possibility of repairing instead of replacing or rebuilding this transmission? Where do I start?
01-29-2011, 08:15 PM
vaffanculo
Dodge Forum Moderator
Join Date: Oct 2008
Location: Pittsburgh, PA
Posts: 7,957
Likes: 0
Welcome to the site. I will move this thread to the second generation Ram section,
FF
01-29-2011, 09:28 PM
Join Date: Jul 2010
Location: Central VA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Doesn't sound good. I'm no transmission expert, but i would try removing both lines and making sure the check valve isn't clogged before you go too much further.
01-29-2011, 09:43 PM
Registered User
Thread Starter
Join Date: Jan 2011
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I separated the lines at the check valve and there appeared to be no restrictions. I started the truck with the line open but no fluid went through it.
01-29-2011, 11:02 PM
Join Date: Nov 2010
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
remember the pump isn't engaged till neutral when you pull those lines off. Any who sound like the pump is dead if she won't move at all.
01-30-2011, 12:11 AM
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,678
Likes: 0
Unplug the 8 pin connector on the drivers side of the trans, does your truck move now? (don't expect automatic shifts, you will have to select your gears manually, if it works at all.)
01-30-2011, 09:54 AM
Registered User
Thread Starter
Join Date: Jan 2011
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I tried unplugging the 8 pin connector as you suggested, but still nothing. I also double checked and no fluid moves in any gear.
01-30-2011, 09:57 AM
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,678
Likes: 0
I think your trans is dead.....
You could have a look at the governor pressure sensor and solenoid, but, it sounds a lot like your pump has given up the ghost.
01-30-2011, 10:07 AM
Registered User
Thread Starter
Join Date: Jan 2011
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I guess I am going have to attempt the rebuild. Do you have a great source for a step by step manual? I have some info I have found in other threads, but am looking for clear and concise instructions.
01-30-2011, 10:09 AM
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,678
Likes: 0
Look in the FAQ section, for a thread by J415, he has links to some good DIY's for trans rebuilding, complete with step by step instructions, and pics.