2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

plenum pan gasket

  #1  
Old 08-25-2012, 12:47 PM
pipeliner798's Avatar
pipeliner798
pipeliner798 is offline
Registered User
Thread Starter
Join Date: Aug 2012
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Default plenum pan gasket

what is the gasket that goes under the intake and plenum pan
 
  #2  
Old 08-25-2012, 01:12 PM
jasonw's Avatar
jasonw
jasonw is offline
Site Moderator
Dodge Forum Moderator
Join Date: Jan 2008
Location: Sioux Falls, SD
Posts: 8,374
Likes: 0
Received 21 Likes on 11 Posts
Default

Fel-Pro Plenum Gasket, just the plenum gasket (also sometimes referred to as the "lower intake manifold gasket"), around $12 or less: MS95462
Fel-Pro Intake Manifold Gasket Set, upper gasket and lower gasket, around $25 or less: MS95392-1
Dorman Intake Manifold Gasket Set, upper gasket and lower gasket, around $50 or less: 615-310

Fel-Pro usually works great. I found these part numbers at O'Reilly Auto Parts, Advance Auto Parts, and Autozone. I double-checked at Rock Auto, they have the same parts for slightly cheaper (way cheaper for the Dorman set), but I didn't check shipping. If you search the forum, you can find a 5% discount code for Rock Auto that will help a little.

Make sure and replace the bolts that go through the plenum gasket, as they are widely referred to as the reason that caused the blown gaskets in the first place.
 

Last edited by jasonw; 08-25-2012 at 01:14 PM.
  #3  
Old 08-25-2012, 04:16 PM
It's Me Patt's Avatar
It's Me Patt
It's Me Patt is offline
Captain
Join Date: Jun 2012
Location: East Coast
Posts: 683
Likes: 0
Received 1 Like on 1 Post
Default

Rock Auto code (in your cart enter it where it asks "where did you hear about us" box)
107634687366547

Lots of info here: https://dodgeforum.com/forum/2nd-gen...um-thread.html
 

Last edited by It's Me Patt; 08-25-2012 at 04:22 PM.
  #4  
Old 08-25-2012, 04:21 PM
It's Me Patt's Avatar
It's Me Patt
It's Me Patt is offline
Captain
Join Date: Jun 2012
Location: East Coast
Posts: 683
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by pipeliner798
what is the gasket that goes under the intake and plenum pan
Are you planning on replacing it?
 


Thread Tools
Search this Thread
Quick Reply: plenum pan gasket



All times are GMT -4. The time now is 09:47 AM.