Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Electrical System
- Dodge Ram 2nd Gen How to Replace Starter
Step by step instructions for the do-it-yourself repairs.
Browse all: Electrical System
Ram 1500 starter removal
#1
Ram 1500 starter removal
I have a 1996 Ram 1500 5.9L, and I am having a problem removing the starter. I was able to loosen the bottom bolt no problem, but the top bolt is a different situation. I am using 3/8" drive 5.8" socket, and I can not get it to budge. Of course, it is pretty tight in there, but, I don't know if I just need to get a 1/2" drive or if I will need to get a torque wrench. I don't want to brake the bolt off thats for sure. I would appreciate any help and advise I can get.
Thank You,
Emmett
Thank You,
Emmett
#4
#5
RE: Ram 1500 starter removal
Thanks for the help, I finally got it out. I cut of a section of pipe and put it over the rachet handle, used it as a braker bar, and it broke loose. What a pain in the --- that was. Ok, now off to the parts store and get a rebuilt starter, and put it in. Then I will be ready to hook up the boat and go fishing in the morning.
#6
Well, once again Dodge Forums comes through for me. I was going to pay someone to do this because I couldn't reach the upper bolt. But after reading this thread, I got all my extensions out and my son got under the truck and got the darn thing off. The bottom bolt housing on the starter was cracked. I have no idea why. When we put the new rebuilt one back on, there was no space between starter housing and mount plate. Everything went snug.
Thank you people for being here for us 'noobs'.
Thank you people for being here for us 'noobs'.
Last edited by faheyd; 03-07-2012 at 10:21 PM.