2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2001 5.9 gas help

  #1  
Old 04-28-2013, 05:52 PM
bigdogdoge93's Avatar
bigdogdoge93
bigdogdoge93 is offline
Registered User
Thread Starter
Join Date: Dec 2012
Location: ingram texas
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default 2001 5.9 gas help

i have a 2001 5.9 gas half ton that i converted to 1 5-speed with a 93 nv4500 did tune up and oil change plus cleaned throtle body runs sluggish in morning until block gets to bout 180 then is fine do i need to advance timing or idk never really messed with efi motors before
 
  #2  
Old 04-28-2013, 05:58 PM
TiminSoCal's Avatar
TiminSoCal
TiminSoCal is offline
Rookie
Join Date: Feb 2013
Location: SoCal Desert
Posts: 70
Likes: 0
Received 1 Like on 1 Post
Default Nooooo.....

Do not touch the distributor!
Timing is ECM controlled all you
will do is mess up fuel sync.
 
  #3  
Old 04-28-2013, 06:05 PM
gdstock's Avatar
gdstock
gdstock is offline
Legend
Join Date: Jul 2011
Location: Austin, TX
Posts: 8,259
Likes: 0
Received 2 Likes on 2 Posts
Default

Got any CELs? Did you change out PCM?
 
  #4  
Old 04-28-2013, 09:50 PM
bigdogdoge93's Avatar
bigdogdoge93
bigdogdoge93 is offline
Registered User
Thread Starter
Join Date: Dec 2012
Location: ingram texas
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

still stock pcm and its had cel since fuel pump was replaced i did a cluster code chek to no avail but havnt hooked to the obd2 yet
 
  #5  
Old 04-28-2013, 09:59 PM
gdstock's Avatar
gdstock
gdstock is offline
Legend
Join Date: Jul 2011
Location: Austin, TX
Posts: 8,259
Likes: 0
Received 2 Likes on 2 Posts
Default

Probably some codes related to PCM not seeing transmission solenoids and pressure sensor. Also may give a clue to the problem.
 
  #6  
Old 04-29-2013, 06:07 PM
zman17's Avatar
zman17
zman17 is offline
Retired Moderator - RIP
Join Date: May 2008
Location: NH
Posts: 18,729
Likes: 0
Received 16 Likes on 15 Posts
Default

Originally Posted by gdstock
Probably some codes related to PCM not seeing transmission solenoids and pressure sensor. Also may give a clue to the problem.

+1, what are the codes you are getting? Try checking them yourself. https://dodgeforum.com/forum/2nd-gen...code-list.html
 


Thread Tools
Search this Thread
Quick Reply: 2001 5.9 gas help



All times are GMT -4. The time now is 08:20 PM.