Noise from either bellhousing or oil pan. - DodgeForum.com

Go Back   DodgeForum.com > Dodge Trucks > Dodge Ram > 2nd Gen Ram Tech
Log In 


2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Noise from either bellhousing or oil pan.

Reply
 
 
 
Thread Tools Search this Thread
  #1  
Old 06-26-2013, 04:31 AM
tbone360's Avatar
tbone360 tbone360 is offline
Professional
 
Join Date: May 2012
Vehicle: 99 ram 1500 rwd
Location: victorville ca
Posts: 102
Default Noise from either bellhousing or oil pan.

Ok guys here's the problem. I'm getting this noise that sounds like something jumping around in the oil pan then it stops. Then sometimes it sounds like a clicking in the bellhousing. Any ideas? Let me know if more info is needed. Thanks in advance.
Reply With Quote
  #2  
Old 06-26-2013, 07:53 AM
AtomicDog AtomicDog is online now
Record Breaker
 
Join Date: Sep 2012
Vehicle: 1996 Dodge Ram 2500 5.9 Magnum 4x4 SLT
Location: Central VA
Posts: 1,098
Default

Remove the dust cover on the front of the transmission and see if one of the flex plate bolts has come loose and is bouncing around in the transmission bellhousing - also, might use an inspection mirror to look at the flex plate itself for cracks
Reply With Quote
  #3  
Old 06-26-2013, 08:38 AM
Gary-L's Avatar
Gary-L Gary-L is offline
Legend
 
Join Date: May 2005
Vehicle: 2007 Ram 1500 4x2 Big Horn aka The Silver Bullet
Location: Norman, Okla-mobile-homa
Posts: 8,387
Default

I have plenty of ideas.

Hope that helps.
__________________
You can have my Oxford comma when you pry it from my cold, dead, and lifeless hands.
Reply With Quote
  #4  
Old 06-26-2013, 09:10 AM
tbone360's Avatar
tbone360 tbone360 is offline
Professional
 
Join Date: May 2012
Vehicle: 99 ram 1500 rwd
Location: victorville ca
Posts: 102
Default

Quote:
Originally Posted by AtomicDog View Post
Remove the dust cover on the front of the transmission and see if one of the flex plate bolts has come loose and is bouncing around in the transmission bellhousing - also, might use an inspection mirror to look at the flex plate itself for cracks
Thanks I'll check it out when I get home.
Reply With Quote
  #5  
Old 06-26-2013, 09:14 AM
tbone360's Avatar
tbone360 tbone360 is offline
Professional
 
Join Date: May 2012
Vehicle: 99 ram 1500 rwd
Location: victorville ca
Posts: 102
Default

Quote:
Originally Posted by VWandDodge View Post
I have plenty of ideas.

Hope that helps.
Sure does. Thanks. Lol
Reply With Quote
  #6  
Old 06-26-2013, 01:18 PM
zman17's Avatar
zman17 zman17 is offline
Retired Moderator - RIP
 
Join Date: May 2008
Vehicle: 2000 2500HD 4x4 5.9
Location: NH
Posts: 18,729
Default

Quote:
Originally Posted by vwanddodge View Post
i have plenty of ideas.

Hope that helps.
hahaha!
__________________
2000 2500HD 4X4 5.9 and 4:10's,HF tuned SCT,Red-Head gear box, HS 1.7's,
50mm Fastman TB, Hughes Plate,2" Hell Bent ,Volant CAI
Flowmaster 50 series, Rock Solid Ram Steering fix,B&M trans cooler,fuzzy dice good for 5HP
Reply With Quote
 
 
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Death rattle from the rear center of motor marcar1993 1st Gen Dakota 8 09-15-2015 08:25 PM
Fan hitting shroud noise on Acceleration dean98ram1500 2nd Gen Ram Tech 5 09-15-2015 08:01 PM
transmission strengthening/upgrades Bansheeman6100 2nd Gen Ram Tech 5 09-09-2015 11:23 AM
Knocking Noise From trans?? joshhassler01 2nd Gen Ram Tech 3 09-05-2015 10:34 AM
New noises IHfarmer3339 2nd Gen Ram Tech 1 09-02-2015 08:01 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

 

All times are GMT -4. The time now is 11:20 PM.